Question about 2009 Saab 9-3
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most likely you have a bad TWICE unit. it is located under the driver's seat, at a low point in the floor and often gets wet.
Posted on Mar 25, 2009
SOURCE: Saab 2004 9-3 Convertible
Had same problem, in the boot right hand side, behind the removable panel there is :
1 - a hydraulic reservoir which must be at correct level.
2 - a black box (stc) this controls the roof system,
switch ignition off then pull the 2 connectors off for 30sec then reconnect.
This worked and hope this resolves your problem
Posted on Apr 06, 2009
Hi I'm litoshop in the fuse block on the left hand side of the driver seat behind panel fuse #3 on the first row that has 9 fuses and on the next row fuse # 14 it will be the 5th fuse good luck if this information has been useful please let us know thank you
Posted on Sep 15, 2009
If you have a 4 cylinder check out this sight for a diagram of serpentine belt http://www.thesaabsite.com/93/93pulleys.htm#BELT+%26+PULLEY+SETUP+%28NOT+SPORT+SEDAN%29
Posted on Jun 02, 2010
Tips for a great answer:
Feb 17, 2015 | 2005 Saab 9-3 Arc
Nov 27, 2012 | Saab 9 3 Cars & Trucks
Sep 09, 2011 | 2004 Saab 9-3
Oct 20, 2010 | 2004 Saab 9-3
Sep 02, 2010 | Saab 9 3 Cars & Trucks
May 22, 2010 | 2003 Saab 9-3
May 17, 2010 | Cars & Trucks
Sep 15, 2009 | 2004 Saab 9-3
Mar 13, 2009 | 2001 Saab 9-3
Feb 20, 2016 | 2009 Saab 9-3
211 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: