Question about 2004 Ford Explorer

Open Question

My gas gauge doesn't work in my 2004 ford explorer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: Rough Ideal on 2004 Ford Explorer

Open hood and listen for vacuum leak sound. pcv hose is most likley cause.

Posted on Sep 04, 2008

  • 1 Answer

SOURCE: 2004 ford explorer outside temp. gauge not working on dashboard

well that means one or two things a sensor or a fuse. should of brought a nissan pathfinder.

Posted on Jan 19, 2009

  • 2 Answers

SOURCE: 2004 ford explorer gas pedal dosen't work even after replacing it

I had this problem too with my 2004 Explorer
Don't know if it had anything to do with it,but i had washed down the engine compartment the previous afternoon. After having it towed to the dealership they told me it was the throttle body.They replaced it and all is good
richt

Posted on Mar 03, 2009

  • 274 Answers

SOURCE: 1992 ford explorer 4.0 4x4 gas gauge works on and

Locate wire on fuel tank sender unit ( usually thru plate under or behind back seat or underneath vehicle) remove wire (Push on clip) ond with ignition on earth wire and see if gauge goes to full If it does it's the tank unit stuffed so replace the tank unit otherwise could be gauge it's self Try this first

Posted on Jan 27, 2010

  • 417 Answers

SOURCE: 2004 Ford Explorer XLT.....The radio and gas gauge quit

The check engine light will represent fault codes that the computer is sensing. Have a mechanic, or go to your local auto parts superstore and have them scan for the fault codes. This will at least give you an idea about some of your problems.

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas gauge working good but truck stalls at 1/2 tank


THIS MEAN YOU NEED TO CHECK THE LEVEL SENSOR INSIDE THE GAS TANK MAYBE GIVES WRONG READING









Apr 03, 2014 | 2004 Ford Explorer

1 Answer

1970 Ford F100 Gas Gauge Not Working


It may be the sending unit in the tank that needs replacing. Here's how you can check: Turn the key on and disconnect the sender unit at the gas tank. Ground the sender unit's wire with a jumper wire from the truck's harness to ground. Watch the gauge. If the gauge on the dash is good, grounding the sender wire will cause the gauge needle to react and should move to full. This would indicate a new sending unit is required. If the gauge doesn't move when the sender unit is grounded, the gauge is bad and needs replacing. Pull the instrument cluster out to replace the gas gauge. Likely any old ford gas gauge might work-back then, there were not so many production changes.

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

1995 thunderbird fuel gauge not working and inside lights stay on.


The gauge In the dash is electronic and the gauge could be bad. My odometer doesn't work but seedo does found that its all electronic

Jul 30, 2012 | 1995 Ford Thunderbird

1 Answer

2004 Chevy Cavalier - car cranks over but doesn't start


Ignition module or crankshaft postion sensor . Test it in the vehicle , test light , volt meter . Videos on youtube .
2004 Saturn Ion 2 2 Misfire Case Study P0300

Mar 25, 2017 | 2004 Chevrolet Cavalier

1 Answer

Gas gauge doesn't work what could be the problem


three things could have gone wrong one the gas gauge could have shorted two the fuel sending unit has gone out of three there is a fuse blown or relay blown

Sep 18, 2011 | 2001 Ford Taurus

1 Answer

Old old Ford F250(1978), horn doesn't work, neither does gas or odometer (but I'm looking for fixes for the horn)


Chances are the horn is burnt out, the gas gauge will require a new fuel tank gas gauge sending unit and the odometer will require the speedomenter be removed and sent out for repair, the little gear drive for the odometer is broken

May 18, 2011 | Ford F-250 Cars & Trucks

2 Answers

2004 Ford Explorer XLT.....The radio and gas gauge quit


The check engine light will represent fault codes that the computer is sensing. Have a mechanic, or go to your local auto parts superstore and have them scan for the fault codes. This will at least give you an idea about some of your problems.

Apr 15, 2010 | 2004 Ford Explorer

1 Answer

2004 ford explorer outside temp. gauge not working on dashboard


well that means one or two things a sensor or a fuse. should of brought a nissan pathfinder.

Jan 19, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
2004 Ford Explorer Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...