SOURCE: pressure control solenoid
If it has a 5R55W trans you have to replace all the solenoids, They come in a pack. Drop the pan and unbolt it.
SOURCE: How do you replace the pressure control solenoid
The pressure control solenoid is inside the transmission under the pan on the drivers side. To replace it you will need a lift and a trans jack. It is really hard to do on the ground because you have to remove the sub-frame from the car. If you are not familiar with trans components and removal you may be better off taking it to a shop. You can do more harm than good. Good Luck
SOURCE: 2009 Chevy Traverse Intake Pluem Full of creamy
It it water or anti-freeze?
If its water then somehow water was sucked up through the air intake. Check the filter box for leaks. If no leaks in the filter box then check all connections from the air box to the intake plenum.
SOURCE: As you stated they will replace the pressure
If you are referring to a P-2716 code, no, they will not replace the PCS; what you need is a new computer.
It will be replaced for free, if your car has less than 80K miles on it. That is the mileage limitation.
The PCS is not the issue, the programming is the issue, but, the computer in your car cannot be 'reflashed'; Toyota will replace it.
In short, replacing the PCS will not rectify your issue. Again, it is a software issue, not a mechanical issue.
SOURCE: 2009 Chevy Traverse with 3800 on it, w/ low coolant
good question with it being a 2009 i'd ask chevy
696 views
Usually answered in minutes!
×