Question about 2006 Dodge Ram 1500
The fog light switch will not stay in
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: where is the module for
CIRCUIT OPERATION - CANADA
On Canadian vehicles, the low-beam headlamps operate when the ignition switch is in the RUN position and the headlamp switch is OFF.
When the ignition switch is in the START or RUN position, circuit A1 from fuse 15 in the Power Distribution Center (PDC) connects to circuit A21. Circuit A21 powers circuit F18 through fuse 19 in the fuse block. Circuit F18 feeds the Daytime Running Module (DRL) module.
Circuit L20 from the headlamp switch connects to DRL module. Circuit L20 is HOT at all times.
The DRL module receives the vehicle speed sensor input from circuit G7. Circuit G34 from the DRL module provides power for the high beam indicator lamp in the instrument cluster.
Circuit L4 powers the low beams of the headlamps. When the headlamp switch is OFF, the DRL module powers the low beams on circuit L4. When the headlamps are ON, the multi-function switch powers the low beams on circuit L4.
Circuit L3 feeds the high beams of the headlamps. When the operator flashes the headlamps with the stalk of the multi-function switch, the DRL module senses voltage on circuit L3. When it senses voltage on circuit L3, the DRL module stops supplying power to the low beams on circuit L4.
Circuit Z1 provides ground for the DRL module.
Posted on Aug 19, 2008
SOURCE: seat belt light staying on
There is a small clip with one wire on it at the base of the seat belt where it connects to the floor. It might be broken, or the switch inside the belt clip is faulty. If the wire is fine and connected the belt clip side needs replacing
Posted on Mar 30, 2009
IT SOUNDS LIKE THE DAYTIME RUNNING MODULE HAS FAILED..BEHIND FUSE BLOCK UNDERHOOD ON INNER FENDER..UNPLUG IT..IF LIGHTS GO OUT,YOU NEED A MODULE..ABOUT 100 BUCKS AT DEALER
Posted on Sep 20, 2009
Tips for a great answer:
Mar 14, 2015 | 1996 Dodge Ram
Aug 23, 2011 | 1997 Dodge Ram 2500 Club Cab
Apr 18, 2011 | Dodge Ram 1500 Cars & Trucks
Dec 12, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport
Mar 30, 2010 | 1997 Dodge Ram 1500 Club Cab
Mar 27, 2010 | 2006 Dodge Ram 1500
Dec 15, 2009 | 2004 Dodge Ram 2500
Jul 21, 2009 | 1996 Dodge Ram 1500 Club Cab
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: