Question about 1995 Jeep Grand Cherokee

3 Answers

1995 jeep grand cherokee laredo 4x4 all power windows not working

I have 95 jeep Grand Cherokee Laredo 4x4 straight six and all my power windows do not work i have replaced the motors check the fuses and relays as well as ran a circuit test on all of them they get power to the plug for the motor but no response. I took the new motors back cuase i figured i got a bad set of motors but that wasnt the case... i would like to know if anyone out there has had this problem and how did they fix it...On top of that my driver side window switch for the driver side window when pressed will not register on the driver side window motor plug but on the passanger side window motor plug

Posted by on

  • 1 more comment 
  • Sly187 Feb 24, 2009

    I have the same problem in a 95 Jeep Grand Cherokee. Wife took it to the store, when she got back none of the 4 windows will work! All the door lock work fine. Mine does have a window lock to keep from rolling down. Any chance this could be the issue? I have worked the button in and out but still no window movement.............

  • laurig99 Mar 04, 2009

    How can I remove the boot without damaging it?

  • Anonymous May 02, 2009

    i have a 95 model jeep, i checked power to the switch and the swictch works fine, but i have no power going to the windows to make them work, sounds like they should have recalled this matter, i checked all the fuses, and i have checked most of the wiring without tearing the hold jeep up. anyone with help please let me know, jfogle9878@aol.com

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Had same problem with 94. in the door jam there is a rubber boot that holds all the wires for your power windows and locks and stuff. remove the boot and check each of the wires in that harness to make sure they are not broke. that's what was wrong with mine on both doors. the wires break with repeated door openings.

Posted on Jan 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

So what you are saying is that if you take a volt meter and back probe the switch you have power? what about ground? i have seen problems with the ground wire being broke in the harness thats in the door opening, remove the kick panel in the left side foot well. there should be two our three wires that are grouded to the body check them you should find your problem let me know kdc744

Posted on Jan 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Try grounding the door. Are you sure that the master switch (driver side main switch is OK? they can cause a nightmare if not working correctly (all power goes through there.) Use a volt meter to check power...test light cannot tell you enough!

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

2 Answers

Fireing order diagram


cylinder firing order is: is 1-5-3-6-2-4 .... In Jeep Grand Cherokee Laredo ...Happy motoring.

Sep 04, 2014 | 1996 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee laredo v6 4x4 won't fire on all 6 cylinders just 4 why?


Plenty of causes. Plugs, valves. rings, numerous electronic/electrical faults. Diagnose vehicle and eliminate problems one by one.

Oct 30, 2012 | 1999 Jeep Grand Cherokee

1 Answer

I need to replace my radiator im my 95 grand cherokee laredo and i cant figure out how to get it to come out


You have to remove the engine fan and radiator shroud and the also you have to unbolt the top of the radiator support and remove it. The radiator basically then lifts straight up, out of the jeep.

Sep 10, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Cruise control doesn't work 1995 jeep grand Cherokee laredo


being a 95 locate cruise control unit under hood & check for broking vacume hose
and replace make sure fuse is active

May 02, 2011 | 1995 Jeep Grand Cherokee

1 Answer

1995 4.0 4x4 jeep grand Cherokee Laredo blinking check engine code 38-55


Sorry I can't find a code 38 for '95 Jeeps in any of the data bases.
55 - End of codes

Jun 05, 2010 | 1995 Jeep Grand Cherokee

1 Answer

1995 Jeep Grand Cherokee Laredo - sunroof leak


lift rubber edges and apply clear silicon sealant under edges let cure hose with water to test, if leak then seal edges of glass with eurothane sealant, not silicon will rot in sun within year

Jul 07, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Can i use a 93 jeep grand cherokee door for a 95 jeep grand cherokee laredo?


Yup. The only difference is a federally-mandated impact beam. It will bolt up and work though

Jun 24, 2009 | 1995 Jeep Grand Cherokee

4 Answers

Power windows won t work


There are broken wires in the wiring harness between the frame and your driver's side door. These wires control all the windows and door locks in a 95 Jeep. Same thing happened to me. You will have to cut the rubber boot to get it off and check which wires are broken and repair them.

May 30, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

1,289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...