Question about Cars & Trucks
Replaced blower motor but still not much heat coming through vents high setting not there
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check the coolant level & condition of antifreeze make sure it is not dirty/rusty/muddy if thats ok try a new thermostat & radiator cap if the antifreeze is muddy you may have to blow out the heater core
Posted on Mar 02, 2009
SOURCE: i replaced the blower motor
This sounds like it could be 1 or 2 different problems. The first is the control head. Obviously if the control head is malfunctioning it is not sending the proper signals to the the blend door. If the control head is ok, then it could be the blend door itself or possibly the actuator. Unfortunately, you may have to remove the whole dash to get at the actuator or blend door
Posted on Sep 05, 2010
look for the blower motor restor on the firewall rt side just above the blower motor there should be like 7 to eight wires conected to it closely check for corroded or burnt wires to it if not pull out should be two screws holding it in and see if one of the restor is broken
Posted on Oct 13, 2011
Tips for a great answer:
Jul 14, 2014 | 2000 Buick Regal
Jan 21, 2014 | Cars & Trucks
Nov 09, 2013 | 2004 Ford Taurus
Oct 13, 2011 | Cars & Trucks
May 27, 2011 | 2003 Mercury Grand Marquis
Nov 06, 2009 | 2001 Volvo V70
Jan 31, 2009 | 2004 Chevrolet Silverado 2500HD
Oct 09, 2008 | 2003 Nissan Altima
164 people viewed this question
Usually answered in minutes!