Question about 2011 Chevrolet Malibu
Remote starter worked up until the weather got colder. Once the car warms up the remote starter works. Owners manual does not show where the remote starter is located.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: key fob remote start issues
You need to get one that works on the same wide range frequency as the reciever in the car, and then it's a simple matter of opening both the new and old fobs, and matching the fine frequency settings by putting the little switches inside where they should be according to the old fob's switches. If there are no switches in the old fob, it's preset and there's not much you can do about it.
Posted on Mar 09, 2009
SOURCE: 2007 Chevy Equinox - with
believe it or not you need to take it to the dealer. There is a software reprogram for the remote control door lock receiver to fix the probelm - really common on tahoes and suburbans. Go to the dealer and tell them about bulletin #06-08-52-002g. It probably will need new remotes also. Try and get the dealer to warranty it since its a known product defect and a known problem
Posted on May 03, 2009
Fixed!!! I had several problems with my wife's remote start/lock/unlock/trunk/ panic. First it stopped working, i replaced the battery to find out that the battery holder inside the remote had broken solder at two points. Went to Harbor Freight bought a solder gun for $5 and solder wire for about $2. Once home i soldered the points back together (first time i've ever soldered anything). Put the new battery in and it didn't work. I pulled the whole thing apart and took the circuit board and touched the contacts where the button would have pushed at with a piece of metal. They locked and unlocked the car. So i knew at that point that the rubber thing was jacked. i got some tin foil and 5minute epoxy. Then i clued little tiny squares on the little black Nipples where they would contact the circuit board. Waited 6 minutes and put back together. Found out that if you start the car twice with out puting the key in the ignition you can't use the remote start. After putting the key in the ignition and starting it you reset the system and can remote start again. Dealer wanted 114 for the key remote and 54 to reprogram the remote to the car. I fixed my factory remote for under $20. Hope this helps someone
Posted on Feb 06, 2010
You can put in a new cd player with the controls for the onboard info center with this dashkit.
Posted on Oct 05, 2010
Tips for a great answer:
Dec 09, 2016 | Cars & Trucks
Nov 15, 2016 | 2011 Toyota RAV4
Jan 13, 2016 | 2011 Toyota Camry
Jan 05, 2016 | 2006 Scion xB
Dec 15, 2013 | 2007 Jeep Grand Cherokee Overland
Dec 11, 2013 | Cars & Trucks
Dec 25, 2011 | 2011 Chevrolet Malibu
Feb 04, 2011 | 2005 Saturn ION
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: