Question about 2004 Buick Rainier

Open Question

Location of brake light fuse

Brake lights do not work, bulbs ok, what fuse in fuse box.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: tail lights wont come on

Open the passenger door and look on the right side of glove compartment. You will see a small door that says fuse.

Posted on Aug 24, 2008

  • 193 Answers

SOURCE: fuse box location

The fuse box or panel, is located under the dash on the far left, next to the parking brake release handle. Looking in this area, you will notic a small black plastic panel. Remove this panel and you will see the fuses.

There is a second fuse panel under the hood, up against the firewall. Remove the large black plastic panel and you will find a row of relays, and a number of large type fuses.
Bill

Posted on Nov 18, 2008

neuropagan
  • 46 Answers

SOURCE: all brake lights suddenly stopped working changed bulbs park light fuse and cant find any blown fuses what else can it be

brake switch on the pedal bad.bad relay. do you have a second fuse box if so check it. look at the wiring see if it is frayed or chafed check the connections.check all the fuses not just the ones labeled brakes.switch the relay with one that you know is good like turn signal and see if the turn signal works then check brakes.use a 12 volt test light check the brake switch and probe the wires. hope this helped if not write back and i'll give you more ideas.

Posted on Apr 24, 2009

  • 7353 Answers

SOURCE: 95' Buick regal, 3rd brake light works, tail

I dont have a diagram but the brake light switch has to feed the turn signal switch, Either that wire has a bad connection, or the turn signal switch is bad. Jiggle the turn signal lever and see if the brake lights try to work.

Posted on Nov 25, 2009

  • 2309 Answers

SOURCE: my 94 buick regals turn signals and brake lights

could be brake light switch but i would be more inclined to think the signal switch is bad, the brake light circuit goes from the pedal to to the turn signal switch then to the taillights

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light does not go on, fuse ok new bulbs stil no brake light when brakes are applied


check both fuse boxs if ok check the break light switch on stearing colum may be unpluged or bad

Jan 29, 2012 | 2000 GMC Sierra

2 Answers

No brake lights, or turn signal lights in the back


Because most the time signals and break lights are on same circuit , most likely it is a fuse that blew. Check fuse panel, and it should be marked brake light or fuse, and pull out fuse, replace with same amp. Let me know if this solved problem. Thanks mike from fixya

Jun 09, 2011 | 2005 Dodge Caravan

1 Answer

My inspection garage told me my 3rd rear lights were not working (back up lights). When we pulled the one bulb, it appeared to be perfect and the filament was unbroken. Are the two lights in series,...


if one brake light is off, the other one should be on and you got to check the bulb even if it looks good. if the both brake light bulbs are good and not working then you can go and check the fuse box and check for brake light fuse. if its OK then check the brake switch that usually located on the transmission. Good luck

Dec 16, 2010 | Jeep Cherokee Cars & Trucks

2 Answers

Tail lights do not work all lights work but the back lights do not work. I change the fuse but lights still don't come on. all the other lights work is there other fuses i need to replace


if the bulbs are ok! check bulb socket to see if you have power.with test light, if not make sure sockets are clean. check the bulbs first, because they are a double filiment bulb. for brakes and tail lights. did you change the correct fuse!! it is located in interior fuse box on drivers side end of dash. its on bottom left side of fuse box. its labled "stp lps". hope this helps,

Aug 13, 2010 | 2000 Chevrolet Malibu

1 Answer

Tail lights don't work, but brake, flash and hazzard work.


generally when the fuse is ok and the bulb is ok the problem is corrosion of the ground wire and connection to the frame, or corrosion in the bulb sockets. for starters go to any auto parts store and get an aerosol can of contact cleaner especially for auto bulbs and connections.

Aug 28, 2009 | 1984 Pontiac Fiero

3 Answers

Brake lights do not work All bulbs have been replaced.


Troubleshooting Procedures - Read Completely Before Beginning
(American Car) All Brake Lights Not Working
  • Check System Fuse: A fuse is used to protect the brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse in the fuse panel which is either under the dash or under the hood in the power distribution center. Connect the test light to a ground like an engine or dash bracket and turn the ignition key to the "on" position. Using the test light probe both sides of the fuse. If the test light illuminates on both sides the fuse is ok continue onto the next step. If one side of the fuse illuminates the fuse has failed and needs to be replaced. If the fuse fails as soon as it is replaced or when you apply the brake pedal the brake light electrical circuit is shorted to ground. Rarely a system short can occur, a car repair manual is needed to find the wiring schematic for the brake light circuit. Once the brake light wiring has been located inspect and repair as needed.
  • Check Brake Light Bulbs: All cars have three brake light bulbs that create the brake light illumination affect. If all of these brake light bulbs fail no brake light operation will occur. I know what you're thinking, you might say all three brake lights at once? But in reality one brake light went out at a time and you did not notice. People only tend to notice something when they almost run into the back of your car to help persuade them to inform you the brake lights aren't working. Remove any of the brake light bulbs to confirm the bulb is ok or burned. After the bulb has been removed inspect the filament and replace if failed. If the brake light bulbs are ok continue to the next step.
  • Checking the Brake Light Switch: A control switch is used to connect the brake light electrical circuit. This switch is located near the brake pedal lever. Basic switches have just two wires, power in and power out to the turn signal switch. Use a test light that is grounded and with the key in the "on" position test for power at one side (wire) of the switch, then press the brake pedal while testing the opposite side (wire). It should illuminate the test light, if electrical power is connected through the switch go to the next step. If no power is detected through the switch the brake light switch has failed and replacement is required. If your car is equipped with more than two wires integrated into the brake light switch a car repair manual is needed to locate the proper brake light circuit wiring.

Jul 07, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

2 Answers

2003 silverado 1500 v-6 brake lights dont work


ljones, Did you check the "VEH stop" fuse in the left side instrument panel fuse box. There are 3 stop light fuses, 1 for all the stop lights located in the under hood fuse box. 2 in the left side IP fuse box. 1 for the upper stop light and 1 for the lower stop lights. The fuse box in the IP is where the upper and lower stop lights split. Let me know.

Feb 26, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
2004 Buick Rainier Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...