Question about 1999 Acura TL
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 15, 2016 | Cars & Trucks
The MIL illuminates during a bulb test and a system test.
A DTC will be stored if a MIL is requested by the diagnostic.
You could have a bad instrument cluster ! Here is part of diagnostic flow chart for your vehicle !
Did you perform the Diagnostic System Check-Engine Controls?
Go to Step 2
Go to Diagnostic System Check - Engine Controls
Go to Step 3
Go to Step 5
Jul 09, 2015 | 2004 Pontiac Aztek
The MIL turns OFF after the engine is started if a diagnostic fault is not present.
The MIL remains illuminated after the engine is started if the control module detects a fault. A diagnostic trouble code (DTC) is stored any time the control module illuminates the MIL due to an emissions related fault. The MIL turns OFF after three consecutive ignition cycles in which a Test Passed has been reported for the diagnostic test that originally caused the MIL to illuminate.
The MIL flashes if the control module detects a misfire condition which could damage the catalytic converter.
When the MIL is illuminated and the engine stalls, the MIL will remain illuminated as long as the ignition is ON.
When the MIL is not illuminated and the engine stalls, the MIL will not illuminate until the ignition is cycled OFF and then ON.
Mar 13, 2015 | 2003 Chevrolet Impala
Aug 25, 2014 | Saturn Ion Cars & Trucks
Jun 11, 2014 | Cars & Trucks
Sep 30, 2013 | Cars & Trucks
Aug 27, 2012 | 2001 Buick Regal
Jun 06, 2010 | 2008 Dodge Ram 2500
May 10, 2009 | Hyundai Accent Cars & Trucks
Aug 03, 2008 | 2006 Kia Sedona
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: