Question about Ford Taurus

Open Question

2002 ford explorer with codes p0132, p0135 and p1132. I already changed O2 sensor 1. still throwing codes. What else should I do?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcalkins3
  • 123 Answers

SOURCE: diagnostic code p0135

What engine is in this vehicle? I assume the avalon would be a 3.0L or similar V6 engine. Bank 1 sensor one indicates one of the primary O 2 sensor controlling a/f ratio. Sensor one bank one would be the sensor located in the Front manifold, closest to the engine. Hope this solves your issue. I would first check the conector at this sensor for corrison before buying a new sensor.

Posted on Sep 29, 2008

warlock61
  • 659 Answers

SOURCE: more 99 cougar problems

there is a fuse for the o2 heaters if one of the sensors blew the fuse they will all be out

Posted on Mar 01, 2009

  • 6982 Answers

SOURCE: P0155 & P0135

O2 sensors are tricky. sometimes like anything else they fail. many times though the exhaust mixture they encounter is out of their range and that shows up as a failure.since you seem to have no other problems , I would go ahead and change them, but don't be disappointed if the code shows up again (at least you know it's not the sensors.) I don't like using the process of elimination when doing repairs but sometimes you must.

Posted on Mar 16, 2009

emissionwiz
  • 75197 Answers

SOURCE: P0132 code along with P0300, P0301, P0302, etc.

check for intake manifold for vacuum leaks, use a can of spray carb cleaner and spray around the top of the engine, if you hit a leak the engine idle will change, P0302 is a miss in #2 cylinder (cylinder power output low, lean cylinder due to poss vacuum leak and other issues.). once again an O2 will not cuase a mis-fire.

Posted on Mar 17, 2009

  • 135 Answers

SOURCE: Where is bank1 sensor 1 (O2 sensor) of 2003 Mitsubishi Eclipse

if its a 4 cylinder it will the 02 sensor closest or if not in the exhaust manifold

Posted on Aug 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 2002 ford ranger and it has teas codes P0446 P0135 P0141 P2195 P0403 P0171


P0446: EVAP System Vent Control Circuit http://www.autocodes.com/p0446_ford.html

P0135: O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
P0135 Ford O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1

P0141: O2 Heater Circuit Bank 1 Sensor 2
P0141 Ford O2 Heater Circuit Bank 1 Sensor 2

P2195: Oxygen Sensor Signal Biased/Stuck Lean - Bank 1 Sensor 1
http://www.autocodes.com/p2195_ford.html

P0403:Exhaust Gas Recirculation Control Circuit http://www.autocodes.com/p0403_ford.html

P0171: Fuel Injection System Too Lean Bank 1 http://www.autocodes.com/p0171_ford.html

Nov 15, 2016 | 2002 Ford Ranger

3 Answers

I have a 01 ford windstar im getting acode. P1132 can you explain why


P1132
Lack of HO2S-11 Switch, Sensor Indicates Rich A HEGO sensor indicating rich at the end of a test is trying to correct for an over-lean condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time. I would change both of the upstream (before the catalytic converter) O2 sensors (cylinder bank 0ne and two). 9 times out of ten this is the right guess to fix this code.

Sep 07, 2016 | 2001 Ford Windstar

2 Answers

Mercury sable 2002 fault codes p0132,p1131,p1132


PO132 oxygen sensor high voltage bank 1 sensor 1
P1131 & P1132 lack of upstream heated oxygen sensor switch bank 1

Feb 23, 2015 | Mercury Cars & Trucks

1 Answer

1996 honda accord o2 sensor versus Catalytic converter codes p0135 and p0141


The fault code P0135 means O2 Sensor Heater Circuit (Bank 1 Sensor 1)
The code P0141 means O2 Sensor Heater Circuit (Bank 1 Sensor 2)

Launch X431 Connector

Aug 22, 2012 | 1996 Honda Accord

2 Answers

What's your problem?service engine soon light on code P0132,P2195, P2196


P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1xicon.jpghttp://engine-codes.com/p0132_ford.htmlForum CodePossible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
P2195 - O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1

P2196 - O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1

Jun 29, 2012 | Ford Cars & Trucks

1 Answer

Codes p0132 and p1132


p0132 is heated oxygen sensor.......wiring short to positive
and p1132 is heated oxygen sensor not switching, fuel trim, rich mixture.......intake/fuel system injectors MAF sensor, ECT sensor. hope this helps and if you need any more info just ask

Feb 27, 2012 | Ford Explorer Cars & Trucks

1 Answer

Need Help


have a list of code and correct it one by one.
some error code have same correction.
need your patiences to do this.

Feb 20, 2012 | 2002 Ford Explorer

1 Answer

I'm thinking about buying a 2002 range rover. It has a service/check engine codes of 134,135,155. Is it likely to be more than oxygen sensor problems? Please reply , Mel


with those codes showing, it could be either bad O2 sensors or there is a problem with the wiring to those sensors. Also, the wrong sensors may be installed. I'm assuming codes P0134, P0135, P0155.

For others viewing this:

P0134 = O2 sensor circuit-no activity detected (bank 1 sensor 1)

P0135 = O2 sensor heater circuit malfunction (bank 1 sensor 1)

P0155 = O2 sensor heater circuit malfunction (bank 2 sensor 1)

Feb 11, 2011 | 2002 Land Rover Freelander

1 Answer

I pulled three codes from my cars computer and they where p1132 and p1131and p0135


P1132- Lack of heated oxygen sensor bank 1 switches - Sensor indicates rich
P1131- Lack of heated oxygen sensor bank 1 switches - Sensor indicates lean
P0135- Sensor heated circuit bank 1 sensor 1

Sounds to me like you need an oxygen sensor. I hope this helped and good luck.

Feb 08, 2011 | Ford Mustang Cars & Trucks

2 Answers

2000 Ford F150 XLT Error Code P1132 and P1152


Error codes P1132 and P1152 indicate O2 sensors reading rich at banks 1 and 2. Change O2 sensors.

Jun 28, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...