Question about 2005 Jaguar X-Type

1 Answer

Where's the door locks on the inside of my 2005 Jaguar S Type?

I have to turn the car off and use the remote to unlock the doors when someone is trying to get into the back as I don't see where the door lock/unlock button is inside the Jag?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If you press the unlock button on the key fob twice when you first unlock the car this unlocks all the doors and the boot. If you have only pressed it once only the drivers door is unlocked. If you have only pressed it once and you have started the car push the locking button on the door and the pull it this will then unlock all the doors and boot too so you don't have the turn the car off and press the unlock button on the key fog again. The locking button or lever is located above the door opening handle inside the car the smaller one of the two

Posted on Feb 07, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: car security system do not respond to remote(new battery)

Try re-programming key fob. It's also on fixya.com. I did it and it just worked

Posted on Jun 01, 2009

  • 30 Answers

SOURCE: 04 jaguar x type 2.5 problem with locking mechinisum

have you try pressing the unlock botton two times if the replace batteri on remote or test umlock swich on passanger side

Posted on Jun 09, 2009

  • 1 Answer

SOURCE: my jaguar x-type 04, remote lock does not work,

Hi,

I have a similar problem in my x type. Although if I press unlock button on the key first and then use the metalic key to unlock it dissables the alarm.

Also according to the manual if you unlock by the metalic key the car starts a beeping sound its I think 15-20 second timer within which you should put the key and start the ignition (don't need to start the engin) this will dissarm the alarm if not the alarm will go off in 15-20 second.

Hope this information is of any use, am trying to get hold of Jaguar dealers to fix this issue. If you come accross any solution please do let me know too

Posted on Aug 03, 2009

  • 1 Answer

SOURCE: should the horn sound on a jag s type when i lock

No definately not, the only time the horn will sound is if you are trying to set alarms + a door is open.............Change batteries + try again or check door connections

Posted on Oct 02, 2009

  • 1244 Answers

SOURCE: drivers door lock will not release. tried

well if wd40 helped it mate then you need to spit some 3 in 1 oil in the latch assmebly it need lubed

Posted on Jan 19, 2010

Testimonial: "Thank you for your help. oiling the door latch did indeed work. I thought the problem could only be fixed by a garage appointment. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed battery in the remote with a cr2032. The remote lights up but the doors still don't unlock. any suggestions ?


read qowners manual for exact number of times... but put key in ignition turn on and off between 7 and ten times..... locks will actuate! hit lock button on remote... remote is then set

Jan 29, 2013 | 2005 Chevrolet Equinox LS

1 Answer

How do we disable the central locking of doors in a 2006 Ford Transit van


If the system can be programmed to not lock it will be in the owners manual. If you don't have one go here and download one from Ford, it is free. I think it is a bad idea to disable this due to a family member being car jacked because the passenger's doors where unlocked.

Nov 05, 2012 | Ford Cars & Trucks

2 Answers

Suddenly, my automatic door unlock button on remote for my 2005 Chevrolet Equinox will not unlock doors and alarms goes off if I manually open driver's door and don't start car right away. Wh


I tried replacing battery in my remote. Sometimes it work and sometimes it doesn't. I think it could be a wiring problem in the remote. I know it's a major paun having to hurry up and put key in ignition befofr alarm starts going off.

Oct 30, 2012 | 2005 Chevrolet Equinox

1 Answer

All my remotes won't unlock passenger doors, why?


this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.

Apr 27, 2012 | Cars & Trucks

2 Answers

I have a 2007 Toyota RAV 4 I can't get the remote to work after changing the battery does it have to be reset if so what has to be done. I can lock and unlock the doors manualy but not with the remote...


1. get in the car
2. shut the door
3. place the key in the ignition
4. lock the doors, manually
5. turn the ignition to on then off...do this seven times
6. unlock the doors and try your remote

Sep 20, 2011 | 2006 Toyota RAV4

2 Answers

How do I get my key remote to lock/unlock my toyota rav4 2002 model? I changed the battery because I thought that was the problem but it is still not working. The red light on the remote comes on but then...


You will need to try reprogramming the remote 1st, below is the complete procedure. If the reprogram doesn't restore function then you will need the dealer to test the keyless entry system, you may have a bad module or remote (only applies if both remotes don't work).

Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Aug 24, 2011 | 2002 Toyota RAV4

1 Answer

I got the Viper 5101 remote start installed in my 2007 Hyundai Sante Fe at best buy. The remote works for auto start, but will only lock and unlock the doors sometimes. It seems like if I unlock or lock...


I would take it back and tell them they need to fix it. it sounds like a wire for the lock/unlock may of fallen off or there is a problem with the remote stare module. wires tend to fall off if all the used were crimp connectors and didn't solder the wires together.

Jun 01, 2017 | Hyundai Santa Fe Cars & Trucks

1 Answer

2004 holden rodeo, remote control key wont lock/unlock doors


try putting key in ignition turn to on position
then press lock & unlock several times slowly if door locks cycle up & down after 1st press it lost code and is now resynconised.
now try remote with all doors closed and key out of ignition
if this dont work need to register key(program)back into system which dealer must do with Tech2 if round heart shapped remote

Apr 09, 2009 | 2004 Isuzu Rodeo

Not finding what you are looking for?
2005 Jaguar X-Type Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...