Question about 2005 Jeep Cherokee Limited
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Make sure the brake lamp switch(es) are working and no blown fuses. Be sure no aftermarket accessories have been improperly installed into these circuits.
Posted on Feb 15, 2009
SOURCE: Transmision Shifting Problem
Was the fluid you drained red or black? did it smell like trans or gear oil? With linkage disconnected, could you put trans in park by moving the lever on the side of the unit? Oil condition is likely a separate issue...most "blown" transmissions generally have normal operation of shift, it just dosen't do what you tell it to. two things likely going on are: linkage problem and likely in need of fluid/filter change.
Posted on Mar 16, 2009
oil pressure problem should be checked independently of other problems...Use a good accurate mechanical gauge to check. If pressure is good (no less than 15psi at idle hot (I prefer to see at least 20) check dash grounding, block ground and if OK, change sending unit. Dash and body ground can influence operation of shift and body control modules so indirectly your problem may or may not be related, depending upon what you find while testing. And it could turn out to be a defective module! They are expensive and just plugging new ones in may work, but then again, it might not. I might be totally incorrect on this...that's the value of actually being there instead of doing this by "remote control".
If you read the numerous posts pertaining to all vehicles, you will see that you are not alone with electrical problems...As long as the engineers who design this stuff, keep using "modules" to replace ordinary simple and reliable systems, we will continue to have these problems. Do some testing and I'm sure you will find a solution! (I'm still waiting for someone to make a program for a PC that will give a complete readout of every system in a vehicle, including exact faults instead of general system "suggestions")
Posted on Apr 07, 2009
Tips for a great answer:
Oct 23, 2015 | 2002 Mazda Protege
Jul 12, 2015 | Cars & Trucks
Apr 09, 2014 | 2005 Kia Spectra
Jan 25, 2014 | Jeep Grand Cherokee Cars & Trucks
Nov 02, 2013 | Cars & Trucks
car not changing gears it can be shifter assembly issue, or it can also be
transmission issue. Get the shifter assembly inspected with ignition OFF.
more troubleshooting, I suggest you to get the Following help link checked, its
complete step by step procedure to inspect gear shift issues: -----
GEAR SHIFT ISSUES
These will help.
Dec 22, 2012 | Cars & Trucks
Jun 19, 2012 | 2000 Pontiac Firebird
Jun 14, 2009 | 1994 Jeep Grand Cherokee
May 23, 2008 | 1996 GMC Jimmy
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: