Question about 1991 Toyota Celica

Open Question

Where is the fuel filter in my 90 celica - 1991 Toyota Celica

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 32 Answers

SOURCE: 90 celica fuel pressure???

Check the fuel rails most the japan vehicles don't have screw valve. If you don't see a screw valve you will have to slice in the main fuel line in to your guage.

Posted on Mar 08, 2009

  • 32 Answers

SOURCE: 90 celica

check your catalytic might be clogged.

Posted on Mar 09, 2009

ZJLimited
  • 17970 Answers

SOURCE: change fuel filter on 1994 celica

1994 Toyota Celica 1.8L EFI DOHC 4cyl
The Fuel Filter is located under hood, center, upper firewall, mounted in fuel line.

Common fuel line routing
8e18bc1.gif


View of the common electric fuel pump located under the rear seat
3a8ebd2.gif


Removal Fuel Pump

  1. Disconnect the negative battery cable.
  1. Remove the rear seat cushion.
  2. Unscrew the service hole cover.
  1. Disconnect the electrical fuel pump wiring at the pump assembly. Check for any fuel leakage while in there.
  1. Remove the gas cap, this will prevent any fuel gas spilling out of any high pressure lines.
  2. Using SST 09631-22020 or an equivalent line (flare nut) wrench, disconnect the outlet pipe from the pump bracket.
  1. Remove the pump bracket attaching screws.
  2. Disconnect the return hoses from the pump bracket, then pull out the pump/bracket assembly.
  1. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  1. Remove the sending unit attaching screws, then pull the unit from the bracket. To disassemble:
    1. Remove the lead wire.
    2. Pull the lower side of the fuel pump from the bracket.
    3. Remove the rubber cushion from the pump.
    4. Disconnect the hose from the pump and extract the pump.
    5. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip.
    6. To remove the sender, disconnect the wiring from the bracket and unscrew the sender. Remove the screws, connector support, connector and gasket.
  2. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  3. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration.
To install:
  1. To assemble the pump:
    1. Secure and install a new gasket, connector and support with the screws.
    2. Attach the sensor and secure the screws, connect the wiring to the pump bracket.
    3. Install the pump filter using a new clip.
    4. Connect the outlet hose to the pump.
    5. Install the rubber cushion to the fuel pump. Push the lower side of the pump into place to secure on the bracket.
    6. Engage the connector to the fuel pump.

  2. Install the fuel sending unit to the pump bracket.
  3. Install the fuel pump and bracket assembly onto the tank. Use new gaskets. Tighten the pump bracket retaining screws to 31 inch lbs. (3 Nm).
  1. Connect the return hoses to the pump bracket.
  2. Install the service hole cover, then the engage the fuel pump and sending unit connector.
  3. Connect the negative battery cable
  4. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
  5. Install the rear seat cushion.
I hope helps whit this (remember rated this help) Good luck.

Posted on Dec 17, 2009

astrawoid
  • 294 Answers

SOURCE: where is the fuel filter on a late 94 celica

right under the air filter. remove air filter housing completely, there it will be

Posted on Nov 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuel pressure of a 1992 Toyota Celica?


Direct fuel pump pressure is 60 -80 psi, and regulated fuel pump pressure is 38 - 44 psi.

Jul 24, 2012 | 1992 Toyota Celica

1 Answer

Where is the fuel filter located on a 85 celica supra?


LOOK UNDER HOOD FOR INLINE FUEL FILTER THAT GOES TO CARBURETOR OR FUEL INJECTORS.

Dec 17, 2010 | 1985 Toyota Celica Supra

2 Answers

Where is the fuel line located on a 1994 toyota celica?


Fuel pump access port under rear seat. Line runs from there to firewall, to fuel rail. Filter mounted on left side of firewall. follow the line from the rail backwards to locate filter.

Jul 12, 2010 | 1994 Toyota Celica

1 Answer

Where is the fuel filter on a late 94 celica located


right under the air filter. remove air filter housing completely, there it will be

May 15, 2010 | 1994 Toyota Celica

3 Answers

92 toyota celica fuel pump not working theres a 5 wire connector at the fuel pump 4 seem to have power and ground except 1 a blue with a black tracer


try fuel pump relay first before pump look for fuses blown find the relay let someone cut key on & off while u r touching it if it clicks relay is good

Nov 07, 2009 | 1992 Toyota Celica

2 Answers

90 celica gt4


check cam sensor

Jul 22, 2009 | 1990 Toyota Celica

2 Answers

How do you change a toyota celica 1990 fuel filter


May depend on what country and engine you have (, anyway filter is on the left hand side on the fire wall, you will need a "crows feet" spanner to undo the line that is at the bottom of the filter, the top union bolt can be accessed with a regular wrench. NOTE: undo the union bolt SLOWLY so as the fuel system is under pressure., then undo the bracket that hold the filter. Hint:the genuine toyota filter is usually far better quality than some aftermarket ones, it also comes with the bracket.
cheers

Jul 01, 2009 | 1990 Toyota Celica

1 Answer

90 celica


check your catalytic might be clogged.

Mar 09, 2009 | Toyota Celica Cars & Trucks

1 Answer

90 celica fuel pressure???


Check the fuel rails most the japan vehicles don't have screw valve. If you don't see a screw valve you will have to slice in the main fuel line in to your guage.

Mar 08, 2009 | Toyota Celica Cars & Trucks

1 Answer

Fuel filter


at the begining is very complicate because it is necessary to remove a lot of pieces. I had the same problem and solved it cutting the fuel line and I had to install a new filter with clamps. It will allow you to remove it again without problem.

Jul 24, 2008 | 1990 Toyota Celica

Not finding what you are looking for?
1991 Toyota Celica Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...