Question about Nissan Altima
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Need an ecu wiring diagram
what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.
Posted on Sep 01, 2008
I just replaced the driver's side headlamp on my 2000 nissan altima. The manual advises you to take it to a dealer or details a long process which involves removing the bumper protector -- none of this is necessary. I am not mechanically inclined and a coworker and I did it on a lunch break. Here's how:
1) Disconnect the battery by loosening the nuts that attach both the positive & negative contacts.
2) Once loose, slide off the contacts. At the base of the battery (closest to front of the car) there will be another nut that you'll need to remove (this loosens a clip which holds the battery in place)
3) Once loosened, lift out the battery which will enable you to see the headlamp connection.
4) There is a white plastic ring that attaches to the headlamp connection. Twist this to the left (about a quarter turn).
5) Once you have loosened the white ring, you should be able to gently pull out the headlamp assembly.
6) Remove the headlamp from the socket by pushing on the plastic arm which will release the lamp from the socket (sounds confusing, but once you have the piece in your hand it will make sense)
7) Insert the new lamp into the socket & slide assembly back into the hole. Note. There is a groove in the assembly which will align with a notch in the headlamp frame...you can see this by looking through from the front of the headlight cover on the outside of the car.
8) Replace the white ring and twist to the right to secure in place.
9) Replace the battery & bolt you remove.
10) Replace the positive & negative connectors (hint: don't forget to replace the plastic battery cover before you attach the connectors).
Hope this helps...let me know how you make out.
Posted on Feb 05, 2009
I would start with the o2 sensor first if its not working right it will set off the knock sensor but beware of vaccum leaks sounds like your running lean
Posted on Nov 12, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Tips for a great answer:
Aug 17, 2016 | Nissan Cars & Trucks
Aug 17, 2016 | 2000 Nissan Quest
May 13, 2014 | 1996 Nissan Altima
May 17, 2012 | 2000 Nissan Altima
Aug 02, 2011 | 1996 Nissan Altima
May 20, 2010 | 2000 Nissan Altima
Dec 02, 2009 | 2000 Nissan Altima
Sep 19, 2009 | 2000 Nissan Altima
Aug 04, 2009 | 2000 Nissan Altima
561 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: