Question about 1990 Nissan Pulsar

Open Question

Amp brake and fuel light come on while driving

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES VSC & CHECK ENGINE LIGHT STAYON


diagnostic reader and or workshop time required to
to fix both VSC and engine light faults /codes


VSC is brake /traction related ..... this is one explanation

It would appear that system braking, traction control, and possibly some anti rollover control is dis abled if this warning light is on. So it is both fuel in efficient and possibly dangerous to drive with this light on.

engine light

there are stored fault codes in the engine computer module pointing to faulty sensors on the car needing to be checked or replaced




24771099-nokob1rhilvl5ktvxkxbwupx-3-0.jpg

Jul 06, 2014 | 2006 Toyota Highlander V6

2 Answers

Handbrake & traction lights on when applied brakes


All your doing is applying the brake pedal

That is the only computer input,so maybe the
switch is loose or bad- next to the brake pedal

I would scan for computer data & codes- especially
the body & abs braking system

Mar 08, 2013 | Cars & Trucks

1 Answer

My 1997 Ford F250 power stroke deisel 7.3 keeps blowing fuse #17 10 amp when I put it into Drive


Fuse 17 10amp protects the following 1)transmission control switch and lamp. 2)brake fluid level switch 3)warning chime 4)diesel warning lamps display 5)fuel water switch 6) low vacuum warning switch 7)instrument cluster 8) switch lamps,,,,,,,,,,,,,, i think your problem on transmission control switch, check also brake light and brake switch

Jun 21, 2010 | 1997 Ford F250 SuperCab

1 Answer

Car dies & wont go over 1000rpm


sound like your ABS system. you may have a lose wiring plug some where in the system when the ABS system get active it the system gets all kind of funny things make the car go slow the brakes it brakes it self there is no power in the engine. have your car for a truly electrical check up

Apr 24, 2010 | 1999 Daewoo Lanos

1 Answer

My car just hit 100000 miles. What maintenance do


Hi,
Technically you are looking more at a 90,00 mile check but here it is regardless - this is what you need to do:90,000mi
Replace: Engine Oil & Filter.
Air Cleaner Filter.
Spark Plugs (Platinum Coated).
Engine Coolant.
Inspect: Automatic Trans axle Fluid.
Brake hoses * Lines.
Brake pads, Calipers, and Rotors.
Exhaust Pipe and Muffler.
Suspension Mounting Bolts.
Steering Gear Box, Linkage & Boots/Lower Arm Ball Joint.
Power steering Pump,
Belt & Hoses.
A/C Refrigerant.
Cabin Air Filter
Drive Belt (water pump, alternator and a/con). Timing Belt.
Manual Trans axle Oil.
Brake Fluid.
Drive shafts and Boots.
Vapor Hose and Fuel Filler Cap. Fuel Lines, Fuel Hoses, and Connections.

Long list there eh?

Hope this helps please rate hi if it does.
ead9fd3.jpg

Apr 06, 2010 | 2004 Hyundai Elantra

1 Answer

2002 CELICA WITH 90,000 MILES WHAT KIND OF SERVICE DO I NEED?


Normal Maintenance Details
90,000 Miles (144,000 Kilometers) : All Applicable Models

INSPECT AUTOMATIC TRANSAXLE FLUID
INSPECT BALL JOINT & DUST COVERS
INSPECT BALL JOINTS
INSPECT BRAKE DISCS/ROTORS
INSPECT BRAKE DRUMS & LININGS
INSPECT BRAKE HOSES
INSPECT BRAKE LINE PIPES
INSPECT BRAKE PADS
INSPECT DIFFERENTIAL FLUID
INSPECT DRIVE BELTS
INSPECT DRIVESHAFT/PROPELLER SHAFT DUST BOOTS
INSPECT EXHAUST PIPES & MOUNTS
INSPECT FUEL LINES & CONNECTIONS
INSPECT FUEL SYSTEM
INSPECT FUEL TANK BAND
INSPECT FUEL TANK CAP GASKET
INSPECT FUEL VAPOR SYSTEM
INSPECT MANUAL TRANSAXLE FLUID
INSPECT STEERING GEAR/RACK
INSPECT STEERING LINKAGE
REPLACE AIR CLEANER/ELEMENT
REPLACE COOLANT
REPLACE ENGINE OIL
REPLACE ENGINE OIL FILTER
ROTATE TIRES

Jan 22, 2010 | 2002 Toyota Celica

2 Answers

I need to know what should I take care of 1st with my car. It needs the following; rear shocks battery hold down tran fluid flush brake flush cap rotoe wire need replacement feul systme flush drive blets...


Sounds like you have been talking to a very aggressive sales person!! Assuming the car is running halfway ok, & without seeing the condition of anything the most critical in terms of breakdown are:

  • belts
  • brakes
  • battery hold down
  • cap, rotor, wires, spark plug
  • trans, brake & fuel flush(by the way..no where in your maintenance manual does your car call for flushes of any kind!!) Go by what it says in your book

Oct 05, 2009 | 1996 Toyota Corolla

1 Answer

Brake lights incl the top light.


check for proper working of bulb's, the brake switch, each & every wiring & connection related to braking system a slight wire break can also cause such problem, a failure of brake switch can also cause problem, for your help a brake switch is placed exactly below the brake pedal. so till the problem is solve have a safe drive & happy motoring from siddhanth saying bye.......!!!! for more queries place it any time & your problem will be solve......!!!!

Sep 29, 2009 | 1989 Chevrolet C1500

2 Answers

What is required in the service of a 3.0l subaru liberty at 100000kms?


your owners manual will tell you exactly. usually all filters should be changed (oil, air, auto transmission if equipped, fuel, cabin air etc) as well as spark plugs and wires, distributor cap and rotor if equipped, check the belts and hoses as well as the charging system. All fluid levels should be checked and topped off. Check your tire p.s.i. as well.

Mar 20, 2009 | 2004 Subaru Legacy

Not finding what you are looking for?

Open Questions:

See all 1990 Nissan Pulsar Questions

1990 Nissan Pulsar Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...