Question about Cars & Trucks

Open Question

Hino rb145 bus alternator amp output - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find wiring diagram for 1988 Hino Rainbow Ch160A bus.experts advice would be appreciated.


hino schematics are found in the hino workshop manual for the vehicle
as the schematics is vehicle specific, you most likely will have to either get the manual or see if the service dealer will give you a copy from the manual

Jan 13, 2017 | Cars & Trucks

1 Answer

Dear experts of hino plz i have fb hino 4 cylinder with digital meter . All gauges are fluctuating when vhicle is in operation.


hino heave truck;
flat bed (=fb)

4 cyl gas or diesel , say real isuzu name of engine true name.

sounds to me 1992 any thing
bad power to cluster, (alternator bad or fooled)
do the head lights flare, surge?> that be first test, running.

use a voltmeter at battery
13.3 to 15vdc and steady?
must be. if is work the harness to cluster,
even a loose fuse can do this on very veh.

Jan 20, 2015 | 1992 Isuzu Impulse

1 Answer

Hcan i obtain an electrical wiring diagram for a hino bus modelrc3274a thank you


contact the manufacturer if it is a genuine Hino make. Most busses are just chassisis ( in this case Hino truck) on which a coach builder builds the cabin.In that case contact Hino on google ---technical division or customer service and quote the model and ask for the schematics. If it is a custom built by a coach builder ( plate somewhere near the door -dash -engine bay etc contact them and see if they can supply the schematics for the wiring that they do.

Jan 16, 2015 | Cars & Trucks

2 Answers

Where are fuses for indicators on hino rainbow bus RB145


more fuses located in L.H rear tool compartment lift lid .Un screw black panel at rear of compartment .Also contains fuseable links

Dec 21, 2014 | Cars & Trucks

1 Answer

Self greaser fault on 1988 hino rainbow bus


I am sorry that I can not help you, I do not know what a Rainbow Bus is but make sure you have a clean passages to allow the Automatic Lubrication to work.

Apr 15, 2013 | Cars & Trucks

1 Answer

Daftar nama suku cadang Nissan terano


Kami menjual Spare Part (Suku Cadang) dan Komponen (Component) khusus untuk Truk (Heavy Duty Truck merek Nissan Diesel, Hino, Volvo, dll meliputi model Bus, Cargo Truck, Trailer, Semi Trailer, Low Bed Truck , Logging Truck, Mixer Truck, Dump Truck dan Tank Truck. Untuk bagian Engine, Transmission, Transfer, Cover & Disc Clutch, Steering, Axle, Differential, Compressor, Pump, Electric,dll. Kunjungi web kami untuk detailnya. Informasi lebih jelas, silahkan hubungi :
Mobile : 081382119888 & 081288639888
Phone : 021-44455887 & 44455889
Fax : 021-85904666
Email : marketing@tractor-truck.com
Website : http://www.Tractor-Truck.Com

Jul 30, 2012 | Mazda Cars & Trucks

1 Answer

New battery when i turn on the heat. my battery light came on? why


The alternator should be tested for its operational value in this case. There may be some issues with the charge rate.

Testing the amperage output of the alternator is good for measuring the amount (not the level) of voltage the alternator can produce. This test can be tricky because if the alternator is weak it can still show it as producing amperage. Which is good, but if the voltage is low, it will still allow the battery to go dead. To check the amperage output of an alternator an amp meter is needed. Once the meter is connected start the engine. Next turn on all electrical accessories and raise the engine idle to about 1200 RPM. The alternator should output the max amperage it was designed to produce. Example: a 90 amp alternator should output about 88 amps. Note: An alternator cannot sustain maximum output for long periods of time. If the alternator is forced to operate at maximum output it will overheat and fail. An alternator is designed to operate at max amperage output only for a reasonable amount of time.

((Connect the voltage meter lead the same way you would in a battery static voltage check, Start engine (do not drive) at engine idle the voltage should be between 13.6 to 14.3 volts. If not the alternator may need replacing.)))

Oct 08, 2009 | 1999 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...