Question about Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Charlie. You have replaced the ECM on your van?.
Kedwin,, Your problem is, the computer on that 3.3 L.
Need to be programed with the VIN nember of your car.
The Antitheft System will disable the injectors due a incorrect VIN, Bucause the body computer is not recieve the correct pasword between 5 seconds after start up.
YOU have 2 options. 1 get a ALOHA Smith. some of they have the computer required to program ECMs.
The other option is: Get a new ECM from the dealer, They will program if ask for that.
NOTE:::::: Other way is . Put the body control module with the computer from the same car.
OK... I hope this work for yours.
If NOT letme know I can look for more information.
Posted on Jul 17, 2008
could be vgr valve or the brain box trying to go out vgr valve u can remove and scrape the carbon deposits off using a wired brush alot of times when it is the vgr valve thats all it is they vary rarely have to be replaced
Posted on Apr 28, 2009
SOURCE: The engine shut down while on stop and go traffic. Tried to restart but the throttle was weak and shut down again. After shutting everything down for 5 minutes, restarted the engine. The throttle w
If the car is having trouble maintaining idle (the tach dips and car dies) the common causes are the idle control valve and camshaft position sensors. The cam sensors failing will be indicated by a check engine light.
The ICV can removed and cleaned with good results (I think there is a write up on bimmerfest) or purchased new for about $100.
While you are in there check the intake boot that is Y shaped for cracks, it's prone to fail and will mess up your idle too.
read up on the major forums and you'll get more info
Posted on May 18, 2009
check fuel pump resister. its conector is by the batt. pump runs through it in run, not for 3 sec. when key is turned on. thats why it will start and then quit this happend to my 99 gtp
Posted on Jun 20, 2009
Tips for a great answer:
Oct 17, 2015 | 1997 Dodge Ram 1500 Club Cab
May 21, 2014 | 1997 Dodge Ram 1500 Club Cab
Jan 29, 2013 | 1997 Dodge Ram 3500 Club Cab
This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control
Oct 08, 2012 | 1997 Honda Prelude
Aug 05, 2011 | 2005 Audi A4
Oct 27, 2010 | 1997 Dodge Dakota
May 12, 2010 | 1997 GMC Jimmy
Oct 21, 2009 | 1997 Suzuki Sidekick
Oct 12, 2008 | 1997 Dodge Ram 1500 Club Cab
26 people viewed this question
Usually answered in minutes!