Question about Saturn Ion

Open Question

What problems low clutch/brake fluid will cause

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mas66
  • 104 Answers

SOURCE: Clutch fluid resevoir

Clutch fluid and brake fluid are the same thing. It's usually only sold with the label "Brake Fluid", but it is used in the clutch system as well. In fact, a lot of vehicles only have the one reservoir for both brake and clutch systems. You should use DOT 4 or higher grade. Cheers.

Posted on Oct 25, 2008

  • 179 Answers

SOURCE: In a 2000 Hyundai accent, clutch fluid = brake fluid

Yes that is correct. it should say what type right on the lid. example dot 3 or dot 4.

Posted on Jul 06, 2009

  • 298 Answers

SOURCE: How do you fill the hydrolic fluid for the clutch?

Check out the following

http://wiki.answers.com/Q/How_do_you_bleed_a_clutch_slave_cylinder_on_a_2003_dodge_neon

Thanks for raking my solution.

Cheers.

Posted on Jul 29, 2009

roniecon
  • 6826 Answers

SOURCE: Does the clutch use the same resevoir as the

Follow the clutch pedal to the master for the clutch,to the firewall,and locate the clutch master,if it does not have a reservoir,there will be a hose from the master,to the reservoir,just trace it down,it does not share the reservoir with the brake master cylinder.

Posted on Apr 19, 2010

bonedivers
  • 1140 Answers

SOURCE: low brake fluid message on

add a little fluid anyway, or the float switch is sticky

Posted on May 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Symptoms low clutch fluid


The clutch fluid is also your brake fluid. If it is low then you have a leak somewhere, could be your slave cylinder, or even brake pads are low

Feb 09, 2014 | 2001 Volkswagen Jetta TDI

1 Answer

When I step on the clotch it gets stuck and dosent come back out


CHECK CLUTCH MASTER CYLINDER.SOUND LIKE BRAKE FLUID LOW.IF BRAKE FLUID LOW LOOK FOR LEAKS AROUND CLUTCH MASTER CYLINDER AND CHECK FOR LEAKS AROUND BRAKE LINES AND CHECK FOR LEAKS AROUND CLUTCH RELEASE CYLINDER HYDRALIC LINE FITTING. REASON PEDAL GOING TO FLOOR YOU HAVE FLUID LEAK WHICH WILL CAUSE AIR TO GET IN THE CLUTCH HYDRALIC SYSTEM. YOU HAVE TO LOCATE LEAK FIX AND BLEED THE CLUTCH HYDRALIC SYSTEM.

Dec 27, 2010 | 1999 Volkswagen Passat

1 Answer

Clutch pedal will depress but will noy spring back??


POSSIBLE CAUSES TO YOUR CLUTCH PEDAL PROBLEM. COULD BE BRAKE FLUID LEVEL LOW CAUSING YOU TO GET AIR IN THE HYDRALIC SYSTEM.IF FLUID WAS LOW CHECK FOR FLUID LEAKS AROUND LINES TO CLUTCH MASTER CYLINDER AND CLUTCH SLAVE CYLINDER.IF FLUID LEVEL ALL GOOD. LOOK FOR A BROKE CLUTCH RELEASE BEARING OR FORK.CHECK FOR BROKEN DIAPHRAGM SPRING IN CLUTCH PRESSURE PLATE.

Dec 02, 2010 | 1996 BMW 318

1 Answer

Is there any way to adjust the clutch on 2006 Kia Spectra5?


YOU HAVE HYDRALIC CLUTCH WHICH IS A CLUTCH MASTER CYLINDER WITH SLAVE CYLINDER.IF YOU HAVING CLUTCH PROBLEMS.CLUTCH IS WORN AND SLIPPING OR YOU HAVE LOW FLUID LEVEL IN CLUTCH MASTER CYLINDER.WHICH CAUSES AIR GET IN HYDRALIC SYSTEM.CAUSING CLUTCH PROBLEMS.IF CLUTCH MASTER CYLINDER IS LOW ON FLUID.CHECK HYDRALIC LINE ON SLAVE CYLINDER TO CLUTCH MASTER CYLINDER FOR FLUID LEAKS.

Aug 03, 2010 | 2007 Kia Spectra5

1 Answer

Audi tt 2003 1.8T Brake warning light beeps and comes on when I go around a corner. Clutch pedal occasionally goes to floor when cold and does not want to return. Both these problems have happened at the...


hi, i'm pretty sure that you do have a combo brake/clutch system on the same reservoir. sounds like the brake fluid is low, when you take turns and the brake light goes on, that usually means low fluid sloshing away from internal reservoir sensor. audi and vw take DOT 4 brake fluid only, not DOT 3. You should fill to max level on the brake reservoir(located in front of the drivers seat/steering wheel in the engine compartment) and yes, take it to a professional shop, there maybe other problems in the brake/clutch system in need of inspection. hope i could help.

Jun 07, 2010 | 2003 Audi TT

2 Answers

Clutch pedal fails to return fully after depressing.


If your truck has a hydraulic clutch it will have an extra reservoir, near the brake fluid reservoir, and the clutch side uses brake fluid also. Your problem I think, is that you are low on fluid. That can cause the problem you describe. Look for this extra reservoir and check it for low fluid, it may be dirty but should have full / low mark on the side.

Feb 11, 2010 | 1981 Ford F 100

1 Answer

Leaking brake fluid now my clutch not working !!! help


Are you sure it was brake fluid leaking? If you were leaking transmission fluid then that could cause some of the mechanical workings to stall, in turn causing the clutch to freeze-up. The other (more likely) problem is that you were leaking hydraulic fluid for the hydraulic clutch.

It sounds like you will probably have a hydraulic clutch, and fluid was leaking. If you accidentally topped-up the hydraulic fluid for the clutch with brake fluid, that would be an interesting scenario... not sure how the mis-match would work out. If the hydraulic clutch fluid is simply low, you can flush it out, put new fluid in there and get it to a dealer to repair the clutch

Nov 19, 2009 | 2002 Toyota RAV4

3 Answers

In a 2000 Hyundai accent, clutch fluid = brake fluid


Yes that is correct. it should say what type right on the lid. example dot 3 or dot 4.

Jul 06, 2009 | 1999 Hyundai Accent

2 Answers

Clutch adjustment 95 Jeep YJ


no, there is no clutch adjustment. the clutch is hydraulic, and self adjusting, there are several things that can go wrong with these. with normal wear the fluid can run low allowing air into the system, causing a weak peddle. they can also develop leaks in the master and slave cylinders resulting in fluid loss also causing a weak peddle leading to an inopperative clutch. check the fluid level in the clucth master cylinder(next to the brake master cylinder. if it is empty, refill it(it takes brake fluid) then cycle the clutch peddle a few times and check for leaks. if there is air trapped in the line the clutch will need to be bled. there is a bleeder screw on top of the slave cylinder, bleed it just like bleeding brakes.

Apr 24, 2009 | 1995 Jeep Wrangler

1 Answer

Clutch pedal low near floor, can the clutch be adjusted?


hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Feb 02, 2009 | 2005 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...