Question about 1998 Acura TL
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need a 6 inch extension, short 3/8 ratchet, 5/8 plug socket, 3/8 swivel "u" joint, (sold at sears) 8mm 1/4 drive socket deep well and 1/4 inch ratchet.
find the coil packs (6 total, three in each head.)
remove the two retaining nuts holding each coil pack using 1/4 8mm socket and ratchet.
twist the pack to break the sticking boot below.
pull up (be careful to not rip the boots however it may still happen but rare.)
remove coil packs, the rear is a little more difficult with the intake.
use 6" extension and u joint and ratchet to remove plugs and replace.
reverse order to assemble. Good luck, and hoped this helped.
Posted on Jan 04, 2009
That's easy, visit honestautoestimates.com for free complete information about any repair including how much it should cost.
Posted on Mar 01, 2010
Fig. Fig. 1: Remove the thermostat housing bolts
Fig. Fig. 2: Pull the water outlet neck away from the housing
Fig. Fig. 3: Note the installed position of the thermostat, then remove it
Good luck (remember rated this help).
Posted on Mar 15, 2010
Tips for a great answer:
May 09, 2015 | 2010 Acura TL
Jan 28, 2014 | 1998 Acura TL
Sep 20, 2012 | 1998 Acura TL
Jan 23, 2012 | 1998 Acura TL
Aug 24, 2011 | 1998 Acura CL
Oct 06, 2010 | 1998 Acura TL
Oct 29, 2009 | 1998 Acura TL
Dec 02, 2008 | 1998 Acura TL
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: