Question about 1988 Chevrolet S-10
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Engine Wire diagram for S10
go to autozone.com and you can register any type car and they have pretty good prints and service manuals on line. I have an 89 chevy s10 I just rebuilt my motor and overhauled the complete truck just waiting on a new paint job. best of luck
Posted on Nov 28, 2008
sounds like ignition module inside of distributor cap under distributor rotor button.these do go bad and can easily be replaced.strong suspicion from your details that this is the culprit.
Posted on May 09, 2009
Your vehicle as an ignition control module located on top of the distributor (under the cap and rotor) I would pull the ICM and take it to NAPA and have it tested if bad replace it (cost about $80). Sounds like a ICM problem or it could be the ignition switch located on the steering coloum which can't be tested but costs $20. Hope this works
Posted on Jul 16, 2009
Oil would be 5W30 according to GM but it would have enough mileage by now so that you could go heavier if you wanted, 10W30 or 10W40 if it burns some. The transmission would use Dexron II or whatever replaces it. Read the label on the back to make sure that what you are buying can be used as a substitute for Dexron II. Hope this helps.
Posted on Feb 22, 2010
Tips for a great answer:
Oct 12, 2015 | 1988 Chevrolet S-10
May 06, 2015 | Cars & Trucks
Aug 28, 2013 | Cars & Trucks
Jun 05, 2010 | 1988 Chevrolet S-10
Oct 27, 2009 | Chevrolet S 10 Cars & Trucks
May 09, 2009 | 1988 Chevrolet S-10
Jan 05, 2009 | 1988 Chevrolet S-10
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: