Question about 1997 Dodge Ram 1500 Club Cab

1 Answer

Dodge 2500 diesel 1999 engine light code PO753 want to know how to conferm problem

Posted by on

1 Answer

The code is for a shift solenoid apparently

Google it

Unless you work on your own veh- then you
need a trans or repair shop

Posted on Jan 21, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chryslertech
  • 115 Answers

SOURCE: dodge durango po753

On your first listing you under 04 durango. But now it makes more sense. On that year truck i have replaced the 3-4 shift solenoid for this code many times. You have to remove the valve body from the trans. The solenoid mounted on the valvebody.

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: Trouble code P1740 on 1999 Dodge Ram 2500

I had the same code on my 2001 dodge 2500. The truck wouldn't shift from 3-4. I pulled the trans pan off and replaced a broken spring ($2.00). It is behind a thin plate with 3-4 small torq screws. You don't have to remove the valvebody. Only took me 45 minutes to fix.

I would like to give thanks to Jeff Russel from Teal automotive. He said this is a very common problem. He sells any part for any automatic Transmision and his prices are very affordable.
Here is a link to the website.
http://www.tealautomotiveinc.com/

Hope this helps.

Posted on Jul 19, 2009

  • 83 Answers

SOURCE: 2006 Dodge Ram 2500 diesel truck----need inside fuse box diagram

If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.

Posted on Sep 26, 2009

  • 1 Answer

SOURCE: dodge 2500 ram diesel no tail lights and my abs

replaced the IPM (the fuse box) it was shorted

Posted on Oct 26, 2009

tburtk
  • 158 Answers

SOURCE: 2004 dodge 2500 with cummins diesal engin light

your code is PCM/ECM power input signal intermittent. this is ussually a sign of a bad connection whether it be in a connector or a short or brake in a wire.

Posted on Feb 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clear engine codes 1999 dodge ram 2500


This is the most up-to-date check engine code reference chart for all of Dodge including
Diesel.


2000 and newer Durango have a built-in system that can display check engine light (CEL) codes without the use of a scanner. 1999 and earlier Durangos must be read with a OBD-ll scanner. Your local auto parts store can get the codes for you either way and will usually do this for free.
hope this help let me know : - )


2000 and newer directions:
Turn the key to ON (not start), OFF, ON, OFF, ON and leave it there. If you look in the odometer window the codes will flash any code(s) with a small delay between each result. Each code should be in a P#### format, and will say PDONE when completed - turn your key to OFF and remove. Use the OBD code list to determine what problem the computer detected.

To reset your engine codes:
Remove the negative terminal of your battery (10mm wrench).
Turn your ignition key to START and hold it there for about 15 seconds.
Turn your ignition key to OFF and remove it.
Connect the negative terminal of your battery.
Start but do not hit the throttle. Idle for about 10/15 seconds then turn off.
Restart the truck and drive as usual. It will take at least 12 starts and 48 miles to fully retune the computer. Hard Codes leave a shaddow for 40 full cold starts.

Dec 31, 2011 | 1999 Dodge Ram 2500 4WD

1 Answer

Fireing digram of 1999 dodge ram cummimgs 24 valve 5.9 diesel


Check this firing order for each engine...

1999 Dodge RAM 2500 ¾-Ton Pickup 5.9 liter V-8 VIN "5" HDC

zjlimited_759.gif



1999 Dodge RAM 2500 ¾-Ton Pickup 5.9 liter V-8 VIN "Z" LDC

zjlimited_760.gif


Hope this helps (rememnber to rating this free answer).

Oct 05, 2011 | 1999 Dodge Ram 2500 4WD

1 Answer

Dodge RAM 2500 4x4 Cummins 5.9l diesel: Starts and idles but no throttle - amber engine warning light has illuminated on the instrument display


Manual states possible (probable) engine control problem and needs to be checked by dealer. The big auto parts stores will scan for free and hopefully can point you in the right direction of what needs to be addressed. If not, get back to us with that code and we'll be glad to further assist you.

Feb 07, 2011 | 1999 Dodge Ram 2500 4WD

1 Answer

2004 Dodge Ram Diesel. Check engine light comes


You will need to have a diagnostic test on this vehicle which will then provide you some error codes.Then once you get the error code you can start looking where the fault is.Hope this helps.

Dec 08, 2009 | 2004 Dodge Ram 2500

3 Answers

My 1999 dodge diesel p/u has a code 0216 problem.


0216 is the VP44 deatch code. Go to the Blue Chip Diesel site for a complete injector pump troubleshooting article.

Nov 07, 2009 | 1999 Dodge Ram 2500 4WD

2 Answers

How do i check for fault code using key method on a 1999 dodge diesel 2500


i dont thing you can on that but it has a obd2 in it witch most auto parts store will check for free i know for sure autozone does all cars 96 and later are obd2

Aug 15, 2009 | 1999 Dodge Ram 2500 4WD

2 Answers

1999 Dodge Ram 2500 Diesel 4x4


there is a cruise control module , easiest way to find it is follow 2nd throttle cable under hood right to it. it most cases there unplugged

Jan 08, 2009 | 1999 Dodge Ram

1 Answer

ENGINE LIGHT ON


go to a parts store, most will scan the codes as a free service, write them down, ask them what they recommend to fix the problem, if u need more info, post it here w/ the codes.

Dec 12, 2008 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...