Question about 1993 Dodge Stealth

2 Answers

Handling Hi my name is Tom. I have a 93 Stealth ES at highway speeds slight turns such as on and off ramps it is very hard to maintain the turn , feels like riding on the outside of the tires ,thought it was alignment, had it aligned still the same. I love my car it's pretty fast for having 140,000 miles but the handling really sucks. Any advise would be greatly appreciated. Thanks!

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 195 Answers

Great tires like the T/A help immensly. Did this problem just start? I would also look into putting high performance shocks on all 4 corners like KYB or Bilsteins and making sure all the suspension components are in perfect shape. I love a car that handles! So fun to drive.
Thanks and hope this helps;
RPM Northwest

Posted on Jan 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

I had to Put BF Goodrich Radial T/A's on Mine for the Same Problem. A Lot easier to Navigate with now and will Hug a Curve like a Vette! Please Rate my Response, I need all the Help That I can Get! Thanks!

Posted on Jan 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

When accessing a highway from a frontage road access should you begin accelerating as you approach the highway or wait until you are on the highway to incresse speed

Accelerate while on the "on ramp" until you reach the speed limit + posted on the highway... this way when you reach the highway you will be going the same speed(or close) as the other vehicles can blend in easily.. and NOT cause an accident by going too slow!! On the way down the "on ramp".. start looking at the traffic coming on the highway to find an opening to ease into safely. Use your mirrors and BLINKER... (its easier to slow down a little than speed up)

Jun 06, 2017 | Cars & Trucks

2 Answers

Why does my 2003 pontiac grand prix maintain speed on flat surface when cruise is not turned on?

Sounds dangerous and hard on breaks. I\'d catty with the throstle linkage under the hood. It should twist open with a bit of pressure, than snap shut when you let go. Yours won\'t. The return spring is worn, stretched out, or most likely gone missing or fell out. Find it and hook it up. Or any spring with the power to pull it back to a closed position. Must be hard to restart the car after it\'s warmed up too.

Jul 12, 2014 | 2003 Pontiac Grand Prix

1 Answer

Where is a fuel pump relay located on a 1993 dodge stealth non turbo

the fuel pump relay on a 91 to 93 dodge stealth base and es models is in the passenger area on the passanger side of the car there a lil kick panel held by one screw behind a black cap pull the panel of and its right behind it.. its a gold box with wire harness connected at bottom. its a 2 part relay that controls ur fuel pump and engine managment system. email me at if u would like a pic of were it is at

Oct 23, 2010 | 1993 Dodge Stealth

1 Answer

Turn ac on and car dies in idle. On highway with cruise on car speed slips a little up and down when trying to maintain a constance speed

The first thing to do is the throttle body needs to be cleaned, grime in this area prevents the throttle plate from closing completely and allowing air to enter, making the air/fuel mixture lean. The highway problem be cleared also.

Oct 10, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Left turn signal

Hi my name is Tom and I am here to help you.

Turn signals flash rapidly if your say left signal circuit is not getting enough voltage. Check and clean all the contacts both front and rear systems. Make sure that the sockets the bulbs go into are clean. Check after you clean and the flasher should slow down and you lights should be brighter. Simply put the 12 volt lights are only getting a lot less than 12 volts.

If I can be of further assistance please call or mail me


Jun 28, 2010 | 1993 Lexus Es 300

1 Answer

Jeep bucking or jerking at highway speeds

Uh oh. It sounds like you have the all too infamous "Jeep Death Wobble" Google what I just quoted and you'll find pages and pages talking about it. It is a major problem with those older Jeeps. No one really seems to know exactly what causes it. But the fix is always the same. Get rid of the Jeep and get another vehicle. No Jeeps before 2001 unless you want to take the chance of ending up in the same situation.

Jun 05, 2010 | 1999 Jeep Cherokee

1 Answer

Hi. I have an '82 F-150 with a 351 c.i. engine, the extended cab version with the full-length bed, 4WD, with only 20,000 miles on it. When I'm driving about 70 mph, the tachometer reads 3000 rpm, which...


It does look like you have a 3 speed C6, if the PRND21 description is correct. If you do have overdrive, the "D" will be printed in a white oval.

Sounds like it is OK. My Mustang has a 351C with a C6 trans, and 3000 rpm is about right at 70mph.

The defining factor on the rpm will be the Differential gears, which in a truck, might very well be taller gears instead of highway gears, as the taller gears provide more power output at the axles than the highway gears do.

if you had 3.0 to 1 gears (Highway), that means that the driveshaft will turn 3 times for every complete revolution of the rear wheels(Axle)

If you had 4.0 to 1 gears, then the driveshaft would turn 4 times for every revolution if the axle. Lots of torque for pulling stumps, but on the highway. the engine will have to turn more rpm's to maintain 70 mph vs a 3 to 1.

with the 3 to 1, you will turn less rpm's on the highway, but will have less available low speed power (Torque) at the wheels.

Sounds like the truck is doing fine.

Jun 04, 2010 | 1982 Ford F 150

1 Answer

How do i know if my throttle position sensor is bad

Unplug it and see if anything changes. When mine went bad I could feel the car slightly going faster and slower when trying to maintain a highway speed of 55. This was caused by the TPS. It is a electric servo that turns to adjust the throttle and when they go up they can either not work, or they kinda jitter back and fourth which is what mine was doing.

May 22, 2010 | 1984 Ford Mustang

1 Answer

Car sometimes dies in intersection

clean the throttle body most common cause of idle/decel die off. its cheap and real cheap and easy to do yourself

Apr 13, 2010 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
1993 Dodge Stealth Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides