Question about 1998 Chevrolet Malibu

1 Answer

Ignition switch How do I take off an ignition switch from a 1998 chevy malibu?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

You would be better off to go to a parts store and get a haynes manual for that. It's way too much to explain on here.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 chevrolet malibu is blowing the ignition/batery fuse


could have short loose wire in the ignition switch or ignition switch faulty.

Apr 06, 2011 | 1998 Chevrolet Malibu

2 Answers

1998 Chevy Malibu : Won't Start


check connections from the battery to starter if ok tap on the starter with a hammer as a helper starts the engine if it starts replace starter before you do dose the key turn all the way forward normal starting position? reason i ask is why did you replace the ignition cyl lock?

Dec 24, 2009 | 1998 Chevrolet Malibu

3 Answers

Where does the flasher go on a 98 chevy malibu


Replacement The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.
  1. Remove the bezel from the ignition switch.
7f58edd.gif
Remove the bezel from the ignition switch

Carefully remove the instrument panel accessory trim plate.

9f5c3cc.gif
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .

bd28884.gif
. . . then gently pull the accessory trim plate away

Detach the electrical connector from the hazard warning switch.

daa6205.gif
Unplug the electrical connector from the hazard warning switch . . .

Unfasten the screw securing the hazard warning switch and remove the switch.

c506713.gif
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle


Installation is the reverse of removal.

Dec 01, 2009 | 1998 Chevrolet Malibu

1 Answer

Once a day usually in the afternoon but not


Sounds like you need to have a new ignition switch installed. Copy & paste this link into your browzer: http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Ignition+Switch&currentPage=1&categoryDisplayName=&navValue=16200189&itemId=189-0&parentId=62-0

Nov 02, 2009 | 1998 Chevrolet Malibu

1 Answer

How do I put an ignition switch in on a 98 malibu


first remove trim around instrument cluster.remove the 2 screws holding switch in, push the switch in about 1 inch, lift up then straight out.ignition switch is on back side of lock cylinder.

Sep 21, 2009 | 1998 Chevrolet Malibu

1 Answer

Problems starting


I own a 1998 Chevy Malibu personally, change the ignition switch I had the identical issue, the switch eventually stopped turning completely, my vehicle had to be towed!! Save yourself a headache, I got one from a junkyard for 2.00, but it had to be programmed for the vehicle, I would take it to a trusted shop or dealer.

Jul 29, 2009 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1998 Chevrolet Malibu Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...