Question about Porsche Cars & Trucks
You will need to remove the inside door panel to get to the bolts for the outside handle. I suggest you get a Haynes auto repair manual for the 2011 Cayenne at your local auto parts store. It has complete details of how to do it!
Posted on Jan 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Lower hole in the door jamb loosten allen screw until the cap comes off. Upper hole there is a #20 torx slightly down and inboard of the hole, you need a really long torx bit and pull the handle out slightly. It also helps to pull weatherstrip loose so you can see it.
Posted on Aug 06, 2008
I usually get a haynes manual for this problem it will tell you the proper tools and procedure with out needing an automechanic standing by your side pep boys or your local auto store should sell these manuals hope this helps
Posted on Jan 03, 2009
Remove plastic plug on the inside of door there is 10 mm hole use a hooked pick set pick put through the hole and pull the plastic cir clip towards the back of the door that will release the smaller part of the outer handle then the handle itself can be taken out.this is so simple but so deceiving the actual cir clip is hard to notice because of all the plastic **** on the inside backing plate the cir clip is just on the inside of hole look hard it is 2mm thick & 20mm high (black plastic) place point of pick in between backing plate & cir clip hook it and pull back the front door is based on the same principle but is a lot easier
Posted on Jul 16, 2009
has to remove the inside panel door and remove the clip inside to open the handle cover then u can see the two nuts and remove them
Posted on Mar 28, 2010
there are special dealer tools required for this and would be very difficult with out them you must obtain a t 20 torx screw driver up to 8 in + to release the handle, open the door and at he latched side you will see black plastic body plugs use a flashlight to see inside, move handle back and forth to see screw operation
Posted on Apr 02, 2010
Tips for a great answer:
Nov 07, 2012 | Cars & Trucks
Jan 18, 2012 | Volkswagen Jetta Cars & Trucks
Sep 28, 2010 | 2004 Porsche Cayenne
Apr 06, 2010 | 2007 BMW X3 3.0si SAV
Feb 06, 2010 | 2002 Saturn L-Series
Jan 06, 2010 | 2002 BMW 5 Series
Dec 29, 2009 | 1992 Saturn SL
Mar 24, 2009 | 2008 Audi Q7
Jul 23, 2008 | 2007 BMW X3 3.0si SAV
1,446 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: