Question about Cars & Trucks

Open Question

P0336 on 1997 acura cl will not clear after crank sensor change

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: 1999 Acura CL - Gas Filter

4cyl and 6cyl are both located on the firewall, driver side under the hood

Posted on Oct 28, 2008

tony chavous
  • 50 Answers

SOURCE: Find oil filter in engine of acura CL

back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it

Posted on Feb 03, 2009

sheiden9
  • 87 Answers

SOURCE: check engine light

yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Posted on Apr 04, 2009

  • 82 Answers

SOURCE: where is o2 sensor located

hey there ,,the o2 sensor is located on the exhaust pipe itself..should be a size 22 with wires coming out of it connected to a plug,,,

Posted on Apr 22, 2009

GARYca
  • 672 Answers

SOURCE: 2001 acura cl type s will crank but will not start

are some of your warning lights on your dash not lit when the key is turned to ON?? Such as engine, battery, abs, airbag light etc.

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Acura CL 3.2. Hesitation on acceleration.?just tuned up with new plug wires. any suggestions? Only code or 40 2 sensor bank 1 sensor 1 and bank 2 sensor 1.


You said you changed the plug wires did you change the plugs too? My daughter has a 97 CL and when her plugs get fouled it causes hesitation as well as problems starting up. If you haven't changed those do that first. Is that code correct at 40 or is it 401 ? You can take it to autozone and they can tell you what it means or the correct codes.

Sep 20, 2014 | 2001 Acura 3.2CL

1 Answer

Changed 02 sensor and all codes are clear but check engine light is still on in my 99 acura cl


press the clear DTC button on the scan tool.
bam, gone.
or you are using a cheap scan tools that does not
all factory codes, and one is set.!
keep in mind, the CEL dont glow for all DTCs
and many scan tools are blind to some or all factory codes
P1xxx and P2xxx are both factory only codes, only
Acura codes,
rule 3> if the scan tool does show say P1xxx code
do not use non Acura data on that code, as its a Acura only code
only P0xxx codes are a standard here, in USA>

in some countries, even P0300 code (gross misfire) in Canada
do NOt glow the CEL, but does store the code
amazing huh?

Jan 19, 2014 | Acura CL Cars & Trucks

1 Answer

1997 Acura CL 2.2, car cranks but will not start,does not have spark. When trying to start the D4 light will blink. Have changed fuel pump, distribitor, injector relay, computer, ignition relay under dash...


have u checked ur timing chain/belt? or even the crankshaft sensor? The crank sensor (if bad or broke) will cut out the spark to ur plugs. hope this helps

Sep 29, 2013 | 1997 Acura CL

1 Answer

1999 acura cl 3.0 cranks but wont start


You don't say if you work on your own car
or have experience,if not then a repair shop
You need to check for fuel pressure at the motor
& spark or injector pulse while cranking the motor
You should be asking these questions using Google
& also You Tube Video-- it's all out there in detail

Aug 11, 2013 | 1999 Acura CL

1 Answer

97 Acura CL D4 light flashing


You change the transmission control molcule (TCM).

Jul 26, 2013 | 1997 Acura CL

1 Answer

P0336 on 1997 acura cl 3.0 code will not clear after crank sensor change


Well code 336 means the computer is not getting a crank signal at startup.
If you have replaced the sensor the problem could be the wiring harness or the object the sensor uses to find cylinder one.

Jan 21, 2013 | Cars & Trucks

1 Answer

I have a problem with the oxygen sensor the check engine light goes on but i changed both oxygen sensors and the check engine light still appears PO135 in 98 acura cl


Check the fuses and replace any blown fuses. This code is for the heater circuit of the O2 sensor. The heater is powered by a fuse which may have blown if the heater or the sensor wiring was somehow grounded.

Jan 20, 2013 | 1998 Acura CL

1 Answer

1998 acura cl 3.0l battery dimensions? height, width, length


Hello. 12 V, 720 cranking amps at 0 degrees F, 910 cranking amps at 32 degrees F, 9-5/16 x 6-13/16 x 7-5/8 in. tall, 31.7 lbs., Joe

4 thumbs up please. ty

Oct 27, 2010 | 1999 Acura CL

2 Answers

Check engine light


yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Feb 21, 2009 | 1997 Acura CL

1 Answer

Problems with my acura 3.2 cl not shifting


i had the same problem with my 3.2 cl type-s they had to change out some gears and replace a lot of parts in my transmission. it cost about 2500 to fix thru aamco

Feb 06, 2009 | 2003 Acura 3.2CL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...