Question about 2007 Saturn Outlook

Open Question

Evap canister purge valve replacement on saturn outlook

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 160 Answers

SOURCE: 2006 saturn ion 2.2L engine code came up for EVAP purge/vent

replace your pvc vavle then have your cars underbody washed

Posted on Mar 15, 2009

Ad
  • 67 Answers

SOURCE: saturn code p0442, evap system small leak, can't find leak

I would send the car in for a smoke test...So much easier to find the leak...

Posted on Mar 16, 2010

Testimonial: "found another definitation for a code 422. replaced rear o2,fixed"

lcorgiat
  • 94 Answers

SOURCE: Where is the emissions purge

lcorgiat_19.jpglcorgiat_20.jpgOne of these I believe is right

Posted on Feb 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is purge valve located?


How to test and replace the EVAP Canister Purge Volume ...

? 13:49
https://www.youtube.com/watch?v=QnVUBYdFHGI
Mar 29, 2014 - Uploaded by CarsNToys
The EVAP canister purge control volume control valve is operated by a step motor for control of flow rate of fuel vapor fromEVAP canister.

How To Install Replace Vapor Canister Solenoid Purge ...

? 2:14
https://www.youtube.com/watch?v=TZ6ZB_acC9w
Sep 16, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/vapor-canister-purge-solenoid-valve-ac-delco- ... How To Test and Replace EVAP Canister Vent ControlValve P0446 ...

EVAP Purge Solenoid Removal - YouTube

? 4:24
https://www.youtube.com/watch?v=Xj605HENFno
Feb 26, 2008 - Uploaded by richpin06a
EVAP Purge Solenoid Removal Saturn S-series. ... How To Test and Replace EVAP Canister Vent Control Valve P0446 - Duration: 6:18. by ...


Dec 18, 2015 | Cars & Trucks

1 Answer

Where is purge valve solenoid located?


Mar 16, 2014 - 2 posts - ‎1 author
I have a 2003 Vue 3.0L 2wd.After fueling I have trouble starting, it cranks but I have to pump it a couple of time then it starts, Sometimes after it ... 2008 Saturn Vue Purge valve canister solenoid location ...
9 posts
Aug 24, 2013
access to vent valve solenoid - SaturnFans.com Forums
2 posts
Jan 20, 2013
Service engine soon light: P0440 - SaturnFans.com Forums
6 posts
Apr 15, 2010
Code P0446 (evap solenoid) and now I can't fill the gas ...
16 posts
Nov 17, 2007
More results from www.saturnfans.com

EVAP Solenoid Location - YouTube

? 2:17
https://www.youtube.com/watch?v=jIKaPF2Yw3I
Mar 20, 2007 - Uploaded by richpin06a
Saturn EVAP Solenoid Location. ... How To Test and Replace EVAP Canister Vent Control Valve P0446 - Duration: 6:18. by CarsNToys ...

EVAP Purge Solenoid Removal - YouTube




Dec 11, 2015 | 2003 Saturn VUE

1 Answer

How do I replace the purge valve on 2006 Yukon Denali


Replacing Vent Valve Solenoid Purge Valve Solenoid EVAP Valve 2005 GMC...

Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement . Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following:
2.1.
Push the large size white retainer portion in.


2.2.
Push down, while pulling up slightly in order the disengage the tube.


Disconnect the EVAP canister purge solenoid electrical connector (1).
Remove the EVAP canister purge solenoid bolt (2). Remove the EVAP canister purge solenoid (3) and insulator (1).

Sep 19, 2015 | Cars & Trucks

1 Answer

Where is my purge solenoin on my 1997 Saturn SL1 and what tools do I need to replace it?


PURGE SOLENOID VALVE LOCATED ON THE INTAKE MANIFOLD.FOLLOW THE PCV VALVE VACUUM HOSE CONNECTS TO PURGE SOLENOID VALVE.PURGE SOLENOID VALVE WILL HAVE VACUUM LINE THAT CONNECTS TO EVAP CANISTER TO REAR OF FUEL TANK AREA.

May 12, 2011 | 1997 Saturn SL

1 Answer

Po 442 po 455


P0442 - Evaporative Emissions System Leak Detected (Small Leak)

P0455 - Evaporative Emissions System Leak Detected (Gross Leak)

This diagnosis detects leaks in the EVAP purge line using engine intake manifold vacuum. If pressure does not increase, the ECM will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition. The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.

Causes:
- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
- Leak is in line between intake manifold

Solutions:
- Re-tighten or replace fuel tank filler cap
- Replace damaged or leaking EVAP canister
- Replace damaged or leaking lines.

Feb 10, 2011 | Chrysler Town and Country Cars & Trucks

2 Answers

Ford escort wagon 1997 code p1443 displayed. what does this indicate & where is the cannister? thank you.


P1443 - EVAP Control System / Vacuum System Purge Control Solenoid Or Purge Control Valve Fault. A fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge (fuel vapor) flow at less than 0.02 pounds per minute.

Possible Causes:
  • Blocked fuel vapor hose between the EVAP canister purge valve and the FTP sensor.
  • Blocked fuel vapor hose between the EVAP canister purge valve and the engine intake manifold.
  • Blocked vacuum hose between the EVAP canister purge valve solenoid and the engine intake manifold.
  • EVAP canister purge valve stuck closed (mechanically).

  • Possible Solution:
    Check for blockages between the fuel tank, the EVAP canister purge valve, and the engine intake manifold. Check for obstructions in the EVAP canister purge valve diaphragm and ports.

    The canister is on the passengers side near the firewall if I recall correctly.

    Jan 18, 2011 | Ford Escort Cars & Trucks

    3 Answers

    Po446 evap vent code where is the evap vent located


    Some might have an ses p0446, evap emissions vent circuit low. If you take it to the dealer they want 300-400.00 to fix the problem. GM has a service bulletin on this condition and have the updated part for 180.00, thats suppose to eliminate this issue.

    Basically the problem is, the evap purge vent valve gets clogged with dirt, especially if the truck is used in dirty conditions. Well I figured there had to be a cheaper way to cure this problem.

    Here it is:
    1) find the location of the vent valve; its under the truck, locate the charcoal canister on the front of the gas tank and trace the vent line to the vent valve.
    2) Take the bracket loose with a 5/8 wrench.
    3) Spin the valve around so the side with the hole is facing you.
    4) Take an air compressor and blow the vent valve out.
    5) reinstall and clear the code and it's fixed.

    Now I know the updated part from gm is supposed to keep the valve from clogging ever again, but why spend the money when all you have to do is blow out the vent valve every 50k-100kmi and save your $$$!

    Subject: DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005)
    Models:
    - 1999-2003 Chevrolet Silverado Models
    - 1999-2003 GMC Sierra Models
    --------------------------------------------------------------------------------
    This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 02-06-04-037 (Section 06 -- Engine/Propulsion System).
    --------------------------------------------------------------------------------
    Condition
    Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

    Cause
    Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

    Part Number 15086429 Hose Asm-Evap Emis Cnstr Vent


    Removal & Installation
    Purge Solenoid Valve-2.2L (L61) Engine
    1. Disconnect the evaporative emission (EVAP) canister purge valve harness connector.
    2. Disconnect the vacuum pipe from the EVAP canister purge valve.
    3. Disconnect the purge pipe from the EVAP canister purge valve.
    4. Remove the EVAP canister purge valve and bracket.
    5. Remove the EVAP canister purge valve from the purge bracket.
    6. Inspect for carbon release in the EVAP canister purge valve ports.
    To install:
    1. Install the EVAP canister purge valve on to the purge bracket.
    2. Install the EVAP canister purge valve and bracket. Tighten the purge bracket nut to 71 inch lbs. (8 Nm).
    3. Connect the purge pipe to the EVAP canister purge valve.
    4. Connect the vacuum pipe to the EVAP canister purge valve.
    5. Connect the EVAP canister purge valve harness connector.
    6. Remove the air cleaner outlet resonator.
    7. Disconnect the EVAP canister purge valve harness connector.
    8. Disconnect the engine purge pipe from the EVAP canister purge valve.
    9. Disconnect the engine vacuum pipe from the EVAP canister purge valve.
    10. Remove the EVAP canister purge valve mounting bracket attaching bolt.
    11. Remove the EVAP canister purge valve along with the mounting bracket.
    12. Installation is the reverse of the removal procedure. Tighten the bracket bolts to 71 inch lbs. (8 Nm).

    Purge Solenoid Valve-2.4L Engines
    1. Remove the front purge pipe from the evaporative emission (EVAP) canister purge valve.
    2. Remove the rear purge pipe from the EVAP canister purge valve.
      NOTE The EVAP canister may have released carbon particles, which caused this part to fail, and may cause damage to other components. Check the EVAP canister for loose carbon before returning the vehicle to service.
    3. Disconnect the EVAP canister purge valve electrical connector.
    4. Insert a screwdriver between the EVAP canister purge valve and the mounting bracket in order to release the lock tab.
    5. Remove the EVAP canister purge valve mounting bracket attaching nut, if replacing the bracket.
    6. Remove the bracket.
    To install:
    1. Install the mounting bracket and the attaching nut for the EVAP canister purge valve. Tighten the nut to 71 inch lbs. (8 Nm).
    2. Slide the EVAP canister purge valve onto the mounting bracket. Make sure the lock tab locks the valve in place.
    3. Connect the EVAP canister purge valve electrical connector.
    4. Connect the rear purge pipe to the EVAP canister purge valve.
    5. Connect the front purge pipe to the EVAP canister purge valve.

    Vent Solenoid Valve-2.2L & 2.4L Engines
    1. Raise the vehicle
    2. Loosen the EVAP canister vent valve hose clamp and slide the clamp down the hose away from the EVAP vent valve hose connection.
    3. Remove the hose from the EVAP canister vent valve.
    4. Remove the EVAP canister vent valve by placing a pry bar between the valve and mounting surface, and moving the valve forward.
    5. Remove the clip from the EVAP canister vent valve harness connector
    6. Disconnect the EVAP canister vent valve harness connector.
    To install:
    1. Connect the EVAP canister vent valve harness connector
    2. Install the clip into the EVAP canister vent valve harness connector.
    3. Install the EVAP canister vent valve by pushing the mounts into the original holes.
    4. Lubricate the hose end with lubricant.
    5. Install the hose to the EVAP canister vent valve.
    6. Slide the EVAP canister vent valve hose clamp down on to the hose connection at the EVAP canister vent valve.
    7. Lower the vehicle.

    Hope this help (remember commetn and rated this).

    Apr 21, 2010 | 2000 GMC Jimmy

    2 Answers

    Where is the evaporative fuel solenoid on a 1998 sw2 saturn? i have 2 monitors that with not reset on is the solenoid and the other evap system. i have already changed the gas cap. i do not have a service...


    Evaporative Emission (EVAP) Canister Purge Soleno Evaporative Emission (EVAP) Canister Purge Solenoid Valve is on top of the fuel tank.

    Evaporative Emission (EVAP) Canister Vent Solenoid Valve is at the upper end of the fuel filler pipe.
    id Valve is on top of the fuel tank.

    Evaporative Emission (EVAP) Canister Vent Solenoid Valve is at the upper end of the fuel filler pipe.

    Oct 07, 2009 | 1998 Saturn SC

    Not finding what you are looking for?
    2007 Saturn Outlook Logo

    Related Topics:

    226 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8269 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...