Question about 2004 Chrysler Crossfire

Open Question

Key will not turn ignition to start - 2004 Chrysler Crossfire

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck will not start, wait to start warning light is out?


Please provide more information.

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there is nothing..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there only a ticking/clicking sound..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but the engine only turns over and doesn't catch."

Jan 06, 2015 | Cars & Trucks

2 Answers

Why can't I unlock my ignition and start my car?


Put one hand on the steering wheel and rotate slightly left and right alternatively whilst turning the ignition key at the same time with the other hand. This might release the steering wheel and start ignition.

Hope this helps.

Aug 02, 2014 | 2008 Infiniti G35

1 Answer

My 97 geo prism starts when you put the car to ignite but after that it won't stay running what could it be


First turn of the key energize the car electrical circuits for some circuits radio ets. 2nd turn of the key energize the the starting cycle, when you turn the key to the third spring loaded start mode it completes the circuit to the starter solenoid which engages the starter and start the car, the spring in ignition return the key to ignition on.
Maybe you have a malfunction in the ignition on position. Dont have a large bunch of keys hanging in your ignition, it sings back and forth when the car is in the start mode and cause havoc to your ignition switch.

Jan 12, 2014 | Cars & Trucks

1 Answer

When i turn the ignition key over the 1994 gmc suburban will not start. then when i turn the ignition key over again the vehicle will start with no problem. i dont do anything between turning the key over....


Neutral Safety Switch ? located at the bottom of the steering column. Mine is tricky, have to pull the shift lever while turning over to get it started. happened after i replaced ignition switch & Neutral Safety Switch

Aug 20, 2011 | 1994 GMC Suburban

1 Answer

Flashing alarm light after battery change. Car wont start,


System operation
System arms 5 seconds after switching ignition OFF. Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. If LED flashes rapidly at regular intervals for approximately 1 minute, then flashes at irregular intervals: Key code not recognised. Remove key and try again.
Programming
When
System malfunction: LED illuminates for 1 minute, then flashes at irregular intervals. Key(s) added or replaced.
NOTE: Replacement keys MUST have blue mark. Keys with red mark are NOT compatible with this system.
How
NOTE: Programming method using vehicle keys can be deactivated using diagnostic equipment.
Obtain 2 programmed keys (A and B). Insert key A into ignition switch. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 seconds: Insert key to be programmed into ignition switch. Turn ignition switch to position II. Wait 4 seconds. Switch ignition OFF. Wait 5 seconds. Start engine. If engine does not start and clock LED flashes: Switch ignition ON. Wait at least 20 seconds. Switch ignition OFF. Repeat programming procedure. Repeat above procedure to program remaining keys. Keys can also be programmed using diagnostic equipment

Mar 08, 2010 | 2000 Ford Focus

1 Answer

Car immobilisor


you might be able to reprogram the key, but you can only do this if you have two keys, what you need to do is put one key in the ignition turn the ignition on ( not over ) put the key that needs reprogramming into the drivers door and lock the vehicle with the key not the button, wait 10 seconds, remove the key, then press the unlock on the fobb, turn ignition off, remove key from ignition, put in the key that you just unlocked the car with and turn ignition do not turn over, turn off ignition,remove key wait 10 seconds, then put key back in then you should be able to turn it over as normal, if that does not work you will have to take key to be reprogramed at the main dealer...hope this helps

Feb 13, 2010 | 1995 Volkswagen Golf

3 Answers

Reset immobiliser


u must put a key to ignition and open a drive door 3 times and press and hold lock button

Jan 18, 2010 | 2007 Ford F

2 Answers

When it starts .. it won't stay started.


ENGINE NOT STAY RUNNING.COULD BE STOPPED UP FUEL FILTER BAD FUEL AND .FAULTY OR INCORRECT GAP PLUGS.ALSO BAD SPARK PLUG WIRES.FAULTY IGNITION SYSTEM.USE A DIAGNOSTIC SCANNER TO CHECK IDLE SPEED CODES AND MASS AIR FLOW SENSOR PROBLEMS.

Oct 16, 2009 | 2005 Chevrolet Malibu

2 Answers

Car was stolen ignition was ripped out of 2002 grandam, now car won't start with ignition and security light keeps flashing


groan.....gunna need a bit more info. but i'll try. What portion of the ignition was ripped out? The tumbler + switch? If so, you might need to get the car's system resent to recognize that it has a new ignition put in. Sime vehicles have a theft prevention system in place to prevent the vehicle from running if its been hot wired. Your best bet would be to replace the damaged ignition components (You did not mention if you did or not). If it still doesn't work after you have replced all of the ignition components. You can try to reset the vehicle (doesn't work on all) disconnect negative battery terminal and go back into vehicle and press down the brake pedal for about 30 seconds then reconnect battery and try it....good luck, hope this helps

Aug 17, 2009 | 2002 Pontiac Grand Am

3 Answers

Ignition key wont turn


is it correct key? key and ignition barrel could be worn wiggle key around in ignition while turning? gently but fast wiggling.try lube in key slot also.
if not replace barrel and key

May 31, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
2004 Chrysler Crossfire Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...