- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I just did a 97 Regal yesterday and yes you are correct...the strip must be removed to gain access...depending on model you may have to remove the cushioning panel (piece of upholstery panel) on the inside of trunk lid...follow this video URL as it explains the removal better in video form than written..basically remove the 7 10mm nuts holding panel on, lower trunk lid a little and wiggle panel off, twist socket and remove to gain bulb access..install is reverse procedure ...Regal, Century and LeSabre are all same idea/setup Tail Light Change 1997 2005 Buick Century 2004 Buick Century Custom 3 1L V6
there is a seprate ground that mounts to the frame of your car near the light usualy in trunk in between the rear speakers locate and make shure the conection is good.if that dos not solve it on the pasengers side rear light check bulbs for detereated ends if thay are then replace.this shuold solve you problem
Inside the trunk, under the carpet behind the tail lights will be a whole bunch of small plastic nuts, running from one side of the car to the other. Take all of these plastic nuts off, and the whole tail light assembly will come off in one large piece. Find the bulb you need to replace, and reassemble
yes you will you will have to take side trims and sill panel off get a 10 mm ready and take the bolts out the tail liaghts should come out the license lamps have screws in them and if you looka t them but you should be able to twist bulbs and pull them out / Please rate my response thank you very much