Question about 2004 Kia Amanti

1 Answer

Brake lights stay on

Where is the brake light switch

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 3,103 Answers

Find the brake pedal.. follow the rod behind it up under the dash..and you will see a pressure switch there..it can be adjusted for travel but you can also add a return spring on the pedal shaft to pull the pedal back up..check for operation and adjust as needed..good luck..

Posted on Jan 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights r stay on when key is on goes out with key off


Do all brake lights stay on including high mount? If all stay on suspect problem with brake switch located at brake pedal. If just lower brake lights stay on ( not including high mount ) expect problem with multifunction switch ( signal switch )

Nov 08, 2015 | 2007 Chevrolet Suburban

3 Answers

Why do the brake lights stay on after the brake switch is disconnected?


be sure that brake pedal is all the way up even if you have to pull it up or thers a wire shorted

Oct 15, 2014 | Cars & Trucks

1 Answer

Brake lights stay on, Honda Accord EX, 4 cylinder


The brake lights work regardless of the ignition switch. There is normally a switch mounted under the dashboard, that presses against the brake pedal hangar. Normally, when you press the brake pedal, this switch loses contact with the hangar, and the brake lights come on. If the switch gets broken or out of adjustment, the brake lights can stay on at all times. This will eventually kill the battery. Readjust or replace the brake light switch.

Aug 02, 2014 | Cars & Trucks

2 Answers

1996 HONDA ,BRAKE LIGHTS STAY ON,WHAT IS THE PROBLEM?


its the brake light switch....have it changed and if that does not solve the issue, check the ground wire to the brake light

May 31, 2014 | 1996 Honda Accord

1 Answer

Break lights stay on when car if off


I had this same problem. I turned off my car and the brake lights stayed on. I looked under the dash and found that the brake pedal, when not pressed, barely touched the brake light switch, which controls whether the brake lights are on or off. Initially though I just wedge a thin piece of adhesive foam between the pedal and switch, which worked fine for several months until I found the time to properly fix it. My brake light switch was adjustable so i eventually adjusted the nuts on each side of the brake switch holding it to the pedal bracket so that the brake pedal pushed in the white brake light switch when released. Hope this helps!

Jul 28, 2012 | Mazda Millenia Cars & Trucks

2 Answers

We have an Audi TT and the brake lights stay on after you turn the car off. Also noted that a passing car informed us that the brake lights stay on while driving as well. Could this possible be a switch...


If all the brake lights stay on then the brake light switch is the first thing to check. It cod also be dagger wiring to the switch or it may just be loose and/or out of place.

Mar 08, 2011 | 2001 Audi TT

3 Answers

Brake light stays on just happened 143000 miles


Check your brake switch as it could be faulty hence causing a close circuit which in turn causes the brake light to stay on.It is normally located at the top of the brake pedal.Hope this helps.

Feb 11, 2010 | 2003 Chevrolet Astro

2 Answers

91 honda accord brake lights stay on replaced


are you sure you the adjustment to it is correct the button in the end of the switch has to be fully depressed to deactivate the circuit

Jan 19, 2010 | 1991 Honda Accord

3 Answers

Jaguar x type brake lights stay on


the brake light switch has either moved out of the bracket just above the brake light pedal or the brake light switch itself is faulty.
look just above the brake pedal, there should be a switch on a bracket so that when you press the brake pedal the spring plunger piece of the switch moves out and the lights come on. make sure the plunger goes in when the brake pedal goes back to normal position.if the lights stay on when the plunger is pushed in the switch is faulty and needs changing, quite common. hope this helps

Apr 07, 2009 | 2003 Jaguar X-Type

2 Answers

Tail Lights stay on all the time.


under the dashboard on the drivers side. look at the brake pedal lever. there should be a switch attached. push switch in and twist to remove. then pull the button as far out as it will go. while holding brake pedal down reinstall switch. then pull pedal up to top. this will reset the brake light switch. if they stay on still, then just replace the brake light switch.

Jan 19, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2004 Kia Amanti Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...