Question about 2000 Dodge Caravan

2 Answers

Head light adjustment

How do you ajust thehead light

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 46 Answers

Start by removing any excess weight from the trunk of the car.
Use a screwdriver or socket to adjust the screws or bolts.
open the old one and fit the new one.
Take your car out for a test drive to make sure the headlights are adjusted properly.

Posted on Mar 15, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 3,904 Answers

If you open up the hood and look down at the headlight from above you will see some longer screws on the top and on the side. by turning those you will get you adjustment.

Posted on Jan 21, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is torque settings for head bolts on Kia pregio 2001

What are the cylinder head torque settings for a KIA K2700 > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

Aug 17, 2015 | Kia Cars & Trucks

2 Answers

My 1989 gmc serra the head lights don't light the road to well is there something I can do ? different type of bulb

dull head lights cab be from several things
1-bad reflectors behind the bulbs --any yellowing, rusting or dull reflector surfaces -- replace head light assemblies
2 badly aligned head lights-- beams shining off into space instead of on the road. --- have an alignment done on the lights
3 wet roads do not reflect head lights properly so it appears that the lights are not working well--- not much to do. the light reflects forward of the wet surface and not back to the driver
4 only one head light or no main beams and running on low beams only--- check light operation and check light control module for operation

Feb 21, 2015 | 1989 GMC Sierra

1 Answer

How do I ajust headlights?

place the vehicle on level floor about 3ft from a blank wall at night. turn on the head lights to high beam. You will see the centre of the light beam s on the wall ,the centre of the beam has to be set just under the centre height of the head lights and slightly off to the passenger side.
adjustment is by 3 screws at the back of the head light fixtures (springs under the screws)
turning these in or out moves the beam centre and by using a combination of screws movements you will achieve the desired position for the beam centre

Feb 10, 2015 | Cars & Trucks

1 Answer

My 05 denali.The driver side head light will not ajust screw just spins

this is a part of the headlamp assembly so it is not a part you can replace separately
my advice is to take a heat gun and heat the nylon adjusting nut till it starts to shrink in size
when it cools down it will thread again to adjust. removing the headlamp assembly is required to perform this task

Apr 13, 2011 | 2005 GMC Sierra Denali

1 Answer

Head lights pointing down need to adjust any help

Theres an adjustment screw for up and down and also a screw for left and right, you can go to a parking lot and ajust them your self you will aim the light to the specs you like but careful not to aim to high as you will be blinding oncoming drivers, you can always readjust them until you can it right, open the hood during the day to locate the adjustment screws.

Jan 02, 2011 | 2003 Hummer H2

1 Answer

How do you adjust headlight on 2008 uplander

If you look at the top of the head light assembly with the hood open just past the top rubber seal, you will see an alan head adjustor screw. This will adjust the low beam light up and down. the high beams are fixed. I would suggest shining your headlights on to a wall or garage door to get them to the same hight you need.

I am assuming that the design was not changed from my 2005 updander to your 2008. I had to adjust mine while on a road trip. We had a lot of people and stuff in my vehicle which made the headlights shine higher than normal. I was getting a lot of on commig traffic flashing. I was able to ajust them down fairly easy with those adjustor screws. Hope this helps.

Nov 30, 2010 | 2005 Chevrolet Uplander

1 Answer

How do you adjust headlights on 1999 subaru outback?

Head lamp ajustment is part of safety and must be aligned with specification from the saftey standards.You might want to consider takeing your car in to have them ajusted by a certified garage most are.

Dec 24, 2009 | Subaru Outback Cars & Trucks

2 Answers

How to adjust head lights on 2004 sonata

take it to a garage, there are ajusters on the back of each lamp that you twist with a screw driver

Nov 08, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

I need to adjust the beam of light on my headlight.

look into the assy with a high powered flashlight you will see phillips head screws or torx head that will allow you to ajust up down sideways.

Dec 14, 2008 | 2001 Ford Mustang

1 Answer

Head light bulb adjustment need to be level

if you didnt play with the ajustment it should be the same if not the light is not install the right way move the bulb it should work thanks pierre

Jun 24, 2008 | 2005 Nissan Altima

Not finding what you are looking for?
2000 Dodge Caravan Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides