Question about 1998 Buick Park Avenue

Open Question

Where is purge solenoid located on 1998 buick park ave

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jpstuhr
  • 49 Answers

SOURCE: Troubleshooting code: P0442

Here ya go

6b631d6.jpg

Posted on Feb 11, 2009

  • 12 Answers

SOURCE: fuse box location on 1998 buick park ave

RIght hand side of the car behind a panel...3 clips hold it pull it off...Under the hood same side of car MASTER fuse box.....GARY KNOWS ALL ANSWERED THIS

Posted on Mar 26, 2009

c17hydro
  • 2984 Answers

SOURCE: try to locate body control module on a 94 buick park ave

BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.

Posted on Jun 23, 2009

  • 1168 Answers

SOURCE: locate canister purge solenoid for 2000 Buick

The evaporative canister purge valve is found between the upper intake manifold and the rear valve cover.

Posted on Nov 01, 2009

  • 98 Answers

SOURCE: 1998 buick park ave. rear window defroster not working

Rear Defogger Inoperative, But Heated Mirrors Operate Correctly
1. Connect scan tool. Turn ignition switch to RUN position. Turn rear defogger on. Using scan tool, display BCM
outputs. If rear defogger is being requested on, go to next step. If rear defogger is not being requested on, go to
step 10).
2. Ensure ignition switch is in RUN position. Remove rear defogger relay from rear junction block, located on center
right rear of passenger compartment, under rear seat. Connect test light between ground and defogger relay
harness connector terminal F3 (Brown wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 11).
3. Connect test light between ground and defogger relay harness connector terminal A2 (Red wire). If test light
illuminates, go to next step. If test light does not illuminate, go to step 12).
4. Connect test light between defogger relay harness connector terminals A2 (Red wire) and B3 (Purple wire). If test
light illuminates, go to step 13). If light does not illuminate, go to next step.
5. Disconnect rear defogger positive and negative feed bus connectors. Connect a jumper wire between defogger
relay harness connector terminals F3 (Brown wire) and A4 (White wire). Connect test light between ground and
positive feed bus connector terminal "A" (Black wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 8).
6. Connect test light between positive feed bus connector terminal "A" (Black wire) and negative feed bus connector
terminal "B" (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 9).
7. Repair open in Black wire between rear defogger and ground. Recheck system operation.
8. Repair open in Purple wire between rear junction block and heated backlight antenna module. Recheck system
operation.
9. Check for proper terminal contact at rear defogger connectors. Repair as necessary. Recheck system operation.
10. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.
11. Repair open in Brown wire between rear junction block and instrument panel junction block. Recheck system
operation.
12. Repair open in Red wire between rear junction block and underhood junction block (located in right front corner of
engine compartment, between battery and strut tower). Recheck system operation.
13. Connect test light between defogger relay harness connector terminals F3 (Brown wire) and A4 (White wire). If
test light illuminates, go to next step. If test light does not illuminate, go to step 16).
14. Reinstall defogger relay. Disconnect BCM 32-pin Pink connector C2. BCM is located behind right side of instrument
panel, near rear of glove box. Using DVOM, check voltage between ground and BCM harness connector C2
terminal A3 (White wire). If any voltage is present, go to next step. If no voltage is present, go to step 17).
15. Repair open or short to ground in White wire between rear junction block and BCM. Recheck system operation.
16. Check for poor connection at defogger relay terminals. If connections are okay, replace defogger relay. Recheck
system operation.
17. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the transmission lock solenoid located on my 1991 buick park ave


MICHAEL, YOUR BUICK DEALER WOULD BE THE BEST PLACE TO FIND YOUR ANSWERS. STOP BY AND TALK TO THEM.THANKS

Jan 25, 2016 | 1991 Buick Park Avenue

1 Answer

Tcc solenoid replacement 2000 buick park ave.


Not easily at all
Have to drop one side of sub frame to remove
trans side cover I believe

Jul 28, 2013 | Cars & Trucks

1 Answer

My engine on my 1998 buick park ave ultra sounds like it's revvin up when i have it in park


Clean your IAC.

FYI, you also could have a VACUUM LEAK

The Gen II 3800 Engines have a HORRIBLE ISSUE with the INTAKE. They are made from Plastic and Warp. Waiting for the Engine to Get Hydro Locked (Coolant in the Cylinders)

Apr 12, 2013 | 1998 Buick Park Avenue

1 Answer

Pintle sensor location 1998 buick park ave remove egr value


i took my car to NA Auto Repair they did a great job at very resonable rates

Feb 13, 2013 | 1998 Buick Park Avenue

1 Answer

Code P0441 on 1997 buick park ave


CODE PO441 - EVAP SYSTEM NO FLOW DURING PURGE CONDITIONS. POSSIBLE CAUSES, CHARCOAL CANISTER IS LOADED WITH FUEL OR MOISTURE, EVAP SWITCH IS DAMAGED DISCONNECTED OR IT FAILED, FUEL FILLER CAP IS LOOSE, FUEL TANK VAPOR LINES IS CLOGGED DAMAGED OR DISCONNECTED, PURGE VALVE VAPOR LINE IS CLOGGED DAMAGED OR DISCONNECTED, PURGE SOLENOID IS DAMAGED OR STICKING IT MAY BE STUCK CLOSED, PURGE SOLENOID POWER CIRCUIT IS OPEN CHECK THE FUSE,PCM HAS FAILED.

Aug 01, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

1998 Park Avenue: where is the fuse box on a 1998 buick park ave?...


i have a 98 buick park avenue
i got a problem running it. it start but when i hit the break pedal some light comes out the direction signal and it shuts off i check all the fuse

May 17, 2010 | 1998 Buick Park Avenue

1 Answer

Could you tell me where the fuse is for cigarette lighter on 1998 Buick park ave.


It is located in the fuse box inside car. However, many GM vehicles share fuses with multiple devices. The radio fuse may also operate the cigarette lighter, and so on. My 1991 LeSabre shared fuses. Check fuses to see if any are blown.

Feb 15, 2010 | 1998 Buick Park Avenue

1 Answer

Fuse box location on 1998 buick park ave


RIght hand side of the car behind a panel...3 clips hold it pull it off...Under the hood same side of car MASTER fuse box.....GARY KNOWS ALL ANSWERED THIS

Mar 21, 2009 | 1998 Buick Park Avenue

Not finding what you are looking for?
1998 Buick Park Avenue Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...