Question about Cars & Trucks

Open Question

Size wrench on a oil drain plug 1999 galant - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: oil pan drain plug

Put a rubber washer on the drain plug

Posted on Aug 11, 2008

Ad
jgwhomeequip
  • 1902 Answers

SOURCE: 1999 volvo v70 oil change questions

You can buy a canister wrench at the local auto parts store. You do not need to torque the oil filter on, just hand tighten, No new gasket for the drain plugs just do make sure that it is tightened properly

Posted on Feb 10, 2009

232K7
  • 26 Answers

SOURCE: oil change specs

the engine takes 4qts w/filter and the drain plug is 17mm.

Posted on Apr 14, 2009

GM Elec
  • 1000 Answers

SOURCE: oil drain plug

The oil drain plug is located on the bottom of the oil pan, under the truck. The plug size if metric, 15 mm.
Good luck.
Regards,

Posted on Jul 10, 2009

  • 691 Answers

SOURCE: Looking to change the oil on my V6 AWD 2004 SRX.

Locate the drain plug, size 13mm, drain the oil, replace drain plug. The oil filter is located by the dipstick. Replace filter put 5.6qtz of 5w-30 synthetic and you are good to go. and the oil filter is located to the right of the engine cover if your looking in at it. It looks like a small cast iron canister with a nut on top (its all molded together). unscrew the top of that and it is in there, the oil wrench come and can adjust to different size, I assume you never done an oil change and don't have any tools. go to any local auto parts store and tell them you need everything from oil,filter,removal tools, oil pan, funnel and they will give you everything you need ans some advice. when you put the filter back on, I would only do hand tighten. make sure you rub a bit of oil around the new rubber seal on your new filter using your figure. Buy the time you spend for all the tools what what need for oil change you will spend as much as having the pro do it, Oil change has been cheaper to change now day compair doing it your self. many places are offering 19.95 to 29.95 oil change, its worth all the hassle to let them do it. do the math, filter 6.00, 6qt of oil 27.00, tools 8.00, funnel 3.00, oil pan 12.00 right there is 56.00 buck plus you get to craw under the car and get dirty.

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pan drain plug size buick century


Here's a link to your drain plug,it says to use a 15 mm wrench or socket.

Mar 12, 2013 | Cars & Trucks

1 Answer

Tools for oil change


You only need a few. You need a wrench or socket that fits the oil pan drain plug. Car makers have used all sizes of drain plugs, don't know Saturn's, anywhere from 13 millimeter to 19 millimeter size wrench or socket. One of them will fit yours.
So one wrench (when you find the right one) and you will need a drain pan to catch the oil. Next you will need an oil filter wrench or tool. There are several types and sizes-when you buy the new oil filter you can get the filter remover that fits your filter . A parts person should be able to help you select the right one. Also buy a small funnel to pour new oil into the engine .And don't forget to have a few rags handy to clean up spills and wipe off areas. That's about all that is normally required.

Dec 21, 2012 | 2004 Saturn ION

1 Answer

What size is my oil pan plug, I wanna already have the wrench handy the first time I go down there to drain my oil.......


Most likely a 15 or 16 mm

You need all metric tools
to work on all vehicles from 1980 on

May 26, 2011 | 1999 Pontiac Grand Prix

1 Answer

What size is the oil drain plug on a 2000 ford explorer xls


the oil drain plug uses a 13mm wrench or socket to take it out.

Apr 19, 2010 | 1999 Ford Explorer

1 Answer

Where is the oil filter? Any advice on changing it? 97 mazda 626


A oil change in my area is about $25.00. A filter for my car is about $6.00. Oil is about $1.50 a quart. A oil filter tool is about $4.50. A oil catch pan is about $2.00.

You asked for my advice ... here it is: I'm not going to spend an hour crawling under my car and get dirty for the $5.00 'savings' I might achieve to be stuck with five quarts of dirty oil that I cannot dispose of.

If you are not convinced, the oil filter on your car is probably toward the rear of the engine, normally white. It will look like a small or large soda can (it will be 1/2 quart size or 1 quart size). They come in two 'standard' sizes but are not interchangable. You will need a wrench for the your sized filter. The oil drain is on the bottom of the oil pan. You will likely have to jack your car up and properly support it (dont trust the jack) so you can get under it to remove the drain. I dont know if yours is metric or USA size plug. You will want to take a collection of wrenches or sockets with you ... probably 11,12,13,14 MM and 7/16, 1/2, 9/16, 5/8 wrenches or sockets, which ever you prefer. BE @!%@ careful you dont strip the plug when you put it back - that will add probably $75.00 to the cost of your oil change.

I hope I have helped you with your question. Thanks for your interest in FixYa.com

Feb 17, 2010 | 1999 Mazda 626

1 Answer

What is the size of the allen wrench needed to fit the oil pan drain plug in a 1995 toyota celica


The oil pan drain plug should require a 14mm hex head wrench to remove. The transmission pan requires a 10mm allen head socket, or wrench to remove. Are you sure you're trying to remove the correct drain? The oil drain should be on the passenger side and on the rear corner of the pan.

Dec 12, 2009 | 1995 Toyota Celica

1 Answer

Oil drain plug


The oil drain plug is located on the bottom of the oil pan, under the truck. The plug size if metric, 15 mm.
Good luck.
Regards,

Jul 10, 2009 | 1996 Chevrolet S-10 Pickup

2 Answers

Oil change specs


the engine takes 4qts w/filter and the drain plug is 17mm.

Apr 12, 2009 | 2001 Hyundai Elantra

1 Answer

1999 volvo v70 oil change questions


You can buy a canister wrench at the local auto parts store. You do not need to torque the oil filter on, just hand tighten, No new gasket for the drain plugs just do make sure that it is tightened properly

Feb 10, 2009 | 1999 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...