How to change headlight bulb on 2005 kia sportage

SOURCE: how do you change the right front headlight bulb on a kia sedona

Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.

SOURCE: How to changing the headlight

Take screws off the front cover about 10-20 screws Reemove cover then two screws by the headlight Pull wole healight out, Repalce bulb. Not that hard. Read the manuel. My 16 year old did it with her Dad

SOURCE: Changing bulbs in fog lights

Hi this is a bit of a hair raiser, first of all you need to turn the wheel all the way into the motor, left or right depending .
The plastic cover underneath is only held on by some screws and retainers take these out, the cover will be loose but won't come out, gently pry it away from the fender, reach behind and unscrew the bulb housing. Be warned there are two or three different bulbs on the market take yours out before heading off to your local spare parts dealer, it might save you the time of having to go again.
hope this helped
regards Warren

Greg

• 55 Answers
• Posted on Oct 23, 2009

SOURCE: How do you replace a Drivers side headlight bulb 2006 kia spectra

Helps to remove the battery, but small ahbds can do it.

Directly behind the lens is a big round cap ... twist it off. The bulb is held in place with a spring that locks in to a notch in the holder. When handling the new bulb, don't touch the glass. The oil from your skin will cause it to shatter when turned on.

SOURCE: replacing my headlight bulb in my kia amanit 2004

1. Open the hood of your KIA Amanti and look behind the headlight that has gone out. Locate the round knob on the back of the headlight.
   
2. Turn the knob counterclockwise 1/4 of a turn and gently remove it from the back of the headlight. Carefully remove the electrical cable within the headlight housing that is attached to the back of the headlight bulb.
   
3. Locate the metal clip that holds the light bulb in place by pushing the clip arm straight in and sliding it down. Remove the bulb from the headlight housing.
   
4. Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing.
   
5. Turn on the headlights to verify that they are in working order.