Question about Lincoln Cars & Trucks

1 Answer

Lincoln door handle sticking

Door handle

Posted by on

  • 4 more comments 
  • barryn37672
    barryn37672 Jan 21, 2013

    Is is a 2009 MKS. It is the driver side door, when you pull the handle to open the door, the handle stays open. Thanks

  • Jessica Sedoris Jan 21, 2013

    The outside handle or the inside handle?

  • barryn37672
    barryn37672 Jan 21, 2013

    the outside handle

  • Jessica Sedoris Jan 21, 2013

    Me, personally, I go to the junkyard and take one apart, that way if you break a part, you can just start on a new one. There are a few small plastic parts you'll have to watch for, but basically you have to take off the door panel and the screws on the side, small hands are better to get into the tight areas. Mark the location of the rear glasss retaining bolt, then remove the bolt. Disconnect the outside connecting rod, check which rod you will be replacing. Disconnect the rod from the latch, remove the lock cylinder rod from the lock cylinder lever and so on.

  • barryn37672
    barryn37672 Jan 23, 2013

    I think there might of been some ice in the door or something. This has only been going on for about a week with the weather got real cold. This morning, @ 11 Degrees, I opened the door and I heard something trickle down the inside of the door, and now it seem to be working smoothly. go figure.

  • Jessica Sedoris Jan 24, 2013

    Coolishness!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 22 Answers

What type or model and is it the passenger side door?

Posted on Jan 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It is on a 2006 lincoln zypher


Go out and buy a copy of the Haynes auto repair manual for the 2006 Lincoln Zypher at your local auto supply shop, It will have complete disassembly instructions to get to the inside of the door to reach the door handle on the outside.

Jan 20, 2013 | Cars & Trucks

1 Answer

Passenger door handle broke


Go to your auto supply and get the door handle puller tool to pry off the lock ring that holds the handle on....while you are there get the door handle.

Jan 20, 2013 | 2006 Lincoln Zephyr

1 Answer

The door ajar light is on and won't go off even though all doors are closed also keeping the interior lights on. Is it the sensor and what can I do to fix it without taking it in?


Hello Jessielucas.

In each door latch (not the handles) there is a switch that activates the lights.
You can try to free the sticking switches by spraying a light oil in through the latch openings.
After spraying open and close the doors to try to loosen the sticking switch.
If it fails to free up you may need to remove the inner door panel to get to the inside of the latches.

Mar 18, 2011 | 1997 Lincoln Continental

2 Answers

1996 lincoln continental door latch does not lock/unlock door from inside or outide...door stays open basically...door latch has no response, unlock/lock switch works


I have the same problem.(Door will not stay closed) The door latch itself seems worn to the point where the linkage from both the actuator or door handle causes the latch to get stuck. I can free it with a screw driver applied where linkage connects to the latch, but it will stick again. Dealer wants over 300 with actuator. I am looking in junk yard for part. Remove door panel, somehow disconnect linkage from latch. It makes more sense to remove 3 hex or star screws 1st (27mm) so latch will be more accessible. My problem is the door latch, not anything else. Good luck

Jan 24, 2011 | 1996 Lincoln Continental

1 Answer

How to remove and replace rear door handle on 2003 lincoln ls. I know how to remove door panel - skip this portion. Just need to replace door latch (rear-left side)


unhook the linkages and any elec connectors then the three bolts on outside of door thats how u do the latch. which is it latch or handle?

Aug 22, 2010 | Lincoln LS Cars & Trucks

1 Answer

2006 Lincoln zephyr driver side door wont latch shut


try pulling the door handle a time or two, perhaps the latching mechanism is stuck in the latched position. sometimes pulling the handle and moving the latch with a screwdriver is needed. if this doesn't work then try lifting up on the door while shutting it, if this works then you need new door hinge bushings or new door hinges

May 28, 2010 | 2006 Lincoln Zephyr

2 Answers

How t take off door panal of 2000 lincoln ls


there are screws at the very bottom of the panel then behind the plastic piece behing the door handle lever 2 more inside the handle (used to close the door) and a couple on the rear part of the door about halfway up then just give it a couple little pulls to pop off the push staps

Jun 10, 2009 | 2000 Lincoln LS

2 Answers

Cannot open door from inside on front driverside


29 cent part my fix your problem. There is a nipple on the interior door lock lever that fits into a slot on the door handle lever. Look at passenger side to compare. The nipple is covered with a plastic spacer that may come off. The spacer keeps the lock nipple snug in the handle lever slot; pull the handle lever, it engages the lock lever, opening door. I bought a .29 cent aluminum spacer (#8x1/4 x 1/4) from Orchard hardware. Take needle nose pliers and slip the spacer on, then super glue. Unfortunately if lock lever (where riveted) is badly worn, then it may pivot upward instead of perpendicular to the door, thus defeating new spacer. But you may now be able to open door by pulling handle lever and lock lever at the same time. If you need to replace door handle, others on this site have suggested that you not replace metal frame that door handle is mounted on, but drill out rivets that hold door handle mount.

Jan 29, 2009 | 2001 Lincoln LS

3 Answers

2000 lincoln ls inside door handle not wrking


I had the same problem. Buy the handle from the dealer and I can tell you how to replace it.

Sep 13, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...