Question about 2002 Jeep Grand Cherokee
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
C1 & C2 in your panel are most likely one of the culprits, if no power at heater at seat. Sounds like testing for power at seat switch is easier to do than get at these circuit breakers in the panel. If you have power at switch at seat, then it's not the fuse/circuit breaker. Good reading at this link for you.
Posted on Dec 29, 2008
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
Posted on Apr 03, 2009
left rear of engine block,on transmission bell housing.best way from top under brake booster use a wrench,
Posted on Jun 13, 2009
Both are attached to the throttle body. Tps is on the other end of the throttle plate shaft opposite the linkage, MAP is on the side...has small vacuum hose underneath and is flat, about 3" long. The other item on the TB is the idle air motor, next to tps.
Posted on May 08, 2010
Tips for a great answer:
Feb 19, 2017 | 2005 Jeep Grand Cherokee
Oct 23, 2014 | 1998 Jeep Grand Cherokee
Jan 29, 2013 | 2001 Jeep Grand Cherokee
Oct 13, 2010 | 1996 Jeep Grand Cherokee
Jun 17, 2009 | 2000 Jeep Grand Cherokee
May 30, 2009 | 2000 Jeep Grand Cherokee
May 21, 2009 | 1997 Jeep Grand Cherokee
Apr 05, 2009 | 1994 Jeep Grand Cherokee
Dec 21, 2008 | 1996 Jeep Grand Cherokee
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: