Question about Ford Crown Victoria

1 Answer

Loction of flasher relay 93 cvpi

Just need to know where its locted bulbs come on just wont blink

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,477 Answers

Should be hidden up under the dashboard where you can't see it, and almost can't reach it!
Left of the Speedometer.
Here's a clue.
If your 4-way emergency flashers work, turn them on.
They should "click."
Follow that sound, use a strong flashlight.
Look at where you hear that sound coming from.
The regular flasher relay should be really close to that working relay. They may even be the same shape and color and size.
Helps to have a really small person helping, cause it is really hard to see up under the dash.

Posted on Jan 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2920 Answers

SOURCE: signals don't work, where is the relay flasher

usually they are located below the colmn under the plastic cover.

Posted on Jan 11, 2009

  • 95 Answers

SOURCE: 1998 Ford Explorer blinker problems

you need to go back over all the bulbs. Take each one out and put it back in making sure its working properly. Most likely a bulb is not grounding. I had this on a f-150 that took two days to track down. Good luck

Posted on Mar 21, 2009

  • 3 Answers

SOURCE: 1998 Ford Explorer blinker problems

Have you checked the contacts to make sure they have good contact with the bulb base? I have a 1995 Ford Contour. The turn signal went out. I replaced the bulb and it would work when it wanted to. I checked the contacts and sure enough they weren't making good contact with the bulb. I took a screwdiver and slightly bent the contacts a little. It has worked good ever since.

Posted on Apr 08, 2009

localwonder
  • 6784 Answers

SOURCE: my turn signal and flasher wont work.i replaced the lever on the

A flasher can be located in the fuse panel, under the dash in the wiring loom, in a glove box,\ or, under the hood.

Most flashers are located under the dashboard on the driver's side.


Posted on Jun 24, 2009

  • 3 Answers

SOURCE: stop lamps wont work 93 ford explorer

If automatic trans check for broken wire on brakeswitch attached to brake pedal.

Did mine today.

Posted on Jul 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn signal


check the individual indicater bulbs are all working ,actually look at each one not just the dash indicater light ,if all ok try the hazard switch if same happens the indicator relay needs changing if not the light/indicator switch will need replacing i would think good luck

Mar 19, 2014 | GMC Sierra Cars & Trucks

1 Answer

1998 Dodge Durango flasher relays location


Turn on the Durango and check each of the four turn signals to make sure that the bulbs are not burned out. If you find one that has gone out, replace the bulb and retest the turn signals. When a bulb goes bad on this circuit, the resulting operation can mimic a bad flasher or one that is failing.

Locate the combination turn signal flasher and relay. It is on the left end of the driver's dash. Open the access door and view the collection of relays and fuses. At the left side of the mounting block is a larger flasher and relay. This is the combination turn signal flasher and relay.

Test the relay by placing you finger on the relay housing and activating the turn signal. If you have found the right one, you should feel a clicking as the turn signal blinks. Remove the relay, replace with the new relay and close the access door

.

Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.

Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks

1 Answer

The driver rear blinker is very rapid the driver front blinker doesn't blink, the turn signal in the car is very rapid and we have changed the front bulb can you help


you will need to inspect all of the left side blinker bulbs one of the bulbs that is supposed to blink is bad my buddy has a caviler that had the same problem one of the bulbs ended up being bad it was the rear drivers side bulb. there is also a flasher relay locater under the dash that tends to go bad just listen for the ticking and replace the flasher the flasher costs about 8 bucks at you autopart store ask for a flasher relay. i hope this helps.

Aug 25, 2011 | Saturn SC1 Cars & Trucks

2 Answers

My left turn signal works but it wont blink which fuse is it? or is it something els?


It sounds like the flasher relay is stuck closed. It is located under the left side of the dash, to the right side of the steering column. Try replacing that and double check if you recently replaced any bulbs that they have the correct base for the sockets. Sometimes the bulb might look right but the base is slightly different. The correct turn signal bulb for your vehicle is a 2057, and an EL12 or FL12 for the flasher relay.

Mar 15, 2011 | 1995 Chevrolet Beretta

1 Answer

My turn signal wont blink and have replace all


You will need to replace the flasher relay, it is what makes the bulbs flash.

Jun 04, 2010 | 1993 Buick LeSabre

2 Answers

LEFT TURN LIGHTS WILL NOT WORK ON 1993 TROOPER


believe it or not, a 4 way flasher can cause this even if it itself is working properly, otherwise flasher, bulbs, or switch is bad .

Oct 06, 2009 | 1993 Isuzu Trooper

2 Answers

My turn signals will not blink


Look under the dash, in the fuse box. There is a round silver colored relay, it looks like a plug. Pull it out and take it to your parts store. Ask them for a flasher relay. Part number should be 552 or 550. It should be a two prong or 3 prong flasher.

Apr 10, 2009 | 1985 Buick Somerset

1 Answer

93 S10 left turn signals not working


Have you tried replacing the flasher? You'd think neither side would blink if the flasher was bad but I've seen this happen and it turned out to be the flasher. You could swap the signal flasher with the 4 way flasher to verify that's the problem before going out and buying one. Should be a few bucks at the parts store.

Apr 04, 2009 | 1996 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...