Question about Cars & Trucks
The steering wheel is held on by one large bolt remove it then you will need a steering wheel puller.
Posted on Feb 05, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have a bad clock spring. This is located behind the steering wheel and all electrical functions from steering wheel must go thru it. Pretty common problem on this model. The steering wheel and the steering column trim would have to be removed to replace it.
Posted on Mar 24, 2009
SOURCE: Airbag light flashing
As long as the light is on the airbag system is disabled.
I would suspect that your clockspring behind the steering wheel is going bad. I would have someone with a scan tool that is able to retrieve trouble codes from the airbag system check it for codes to verify this. If so then steering wheel and steering column trim would have to be removed to access the clockspring to replace it.
Posted on Apr 01, 2009
sounds like there is something in the wrong place in the horn button. it makes contact when you turn left just as if you had pushed the horn button. i wonder does your airbag light ever come on, i mean not just in the startup sequence, that's normal. probably you need to take the horn button part of the steering wheel apart and get things back in the right place or maybe replace some parts, but because of the airbag being right there too it's not something i would recommend that you do yourself. accidentally setting off an airbag is not a good thing.
Posted on May 25, 2009
You will have to replace the entire clockspring. I highly recommend having it done at a repair shop because it involves removing the air bag which contains a small explosive device and can be dangerous to someone not trained in removing it.
Posted on Jun 02, 2009
In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury or death.
Posted on Aug 04, 2009
Tips for a great answer:
Feb 26, 2017 | Chevrolet Equinox Cars & Trucks
this case, to troubleshoot this problem, there are solved help links. Click the
link directly and refer the details to solve this problem yourself, with help
of diagrams: ------
and cruise control not working on Plymouth Grand Voyager?
Nov 28, 2012 | GMC Cars & Trucks
----------- Horn and Cruise control quit working?
Horn and cruise control not working on
Plymouth Grand Voyager?
Horn and Cruise control quit working on 2003 Jaguar S-Type? http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html
Cruise control stop working on 1994 Ford ranger? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html
Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html
1996 Ford Explorer: Cruise Control Wiring Diagram?
These will help.
Nov 22, 2012 | 2003 Ford Expedition
Mar 29, 2010 | 1996 Ford Crown Victoria
Aug 08, 2017 | 2002 Saturn L-Series
Sep 24, 2009 | 2001 Dodge Durango
Aug 12, 2009 | 1993 Ford Crown Victoria
Jun 27, 2009 | 1988 Ford Crown Victoria
Jan 20, 2018 | Nissan Cars & Trucks
Jan 20, 2018 | Toyota Cars & Trucks
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: