Question about Cars & Trucks
Having problems locating the front differential for our truck
Try these web sites:
Posted on Jan 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
no fuel shut off switch on pickups that i know of possibly bad fuel pump find your red bypass wire at relay to test pump
Posted on Mar 29, 2009
If the dash is removed you've saved about 9 10ths of the job endurance. Look around, what you believe to be, the perimeter of the heater box. I cannot, and no one else can, tell you exactly where the bolts and nuts that mount the heater box are. Therefore you must viually sixe the box and check outide in the engine compartment and inside under the dash for the mounting bolts.You'll want to start by removing the heater hoses. Then starting at the passenger side engine compartment look for a group of 10mm or 7/16ths nuts retaining the housing and remove them. Do the same inside. The housing is usually held together with screws or clips, it changes year to year. Keep a log or pix of the wires and cables and hoses(vacuum) that are connected to the housing for reassembly. You'll need to "roll" the box out from under the dash depending on how much of the dash has been removed. The core is easy to spot for is has two hoses sticking out, and, is encircled with clips or screws . Also make sure you remove the bracket around the two entry hoses if it has one. Thank you, Dana
Posted on Oct 04, 2009
SOURCE: 1996 gmc sonoma 2.2 engine
For 1996 GMC Truck Sonoma 2WD 2.2L
SFI OHV 4cyl
The EGR Valve is located under hood, center, rear engine area, mounted top rear driver side of engine.
Fig. 11: Unfasten the EGR valve retaining bolts...
Fig. 12: ...then remove the EGR valve from the vehicle
I really hope help with this (remember rated and comment this post).
Posted on Mar 10, 2010
Tips for a great answer:
Mar 23, 2014 | 1998 Dodge Ram 1500 4WD
Jul 02, 2017 | GMC Sierra 1500 Cars & Trucks
Nov 16, 2010 | 1999 GMC Sonoma
Oct 02, 2010 | 1997 GMC Sonoma
Jun 22, 2010 | 1996 GMC Sonoma
Mar 10, 2010 | 1996 GMC Sonoma
Jan 18, 2010 | 1999 GMC Sonoma
Sep 13, 2008 | 1996 GMC Sonoma
35 people viewed this question
Usually answered in minutes!