Question about 1991 Ford Taurus

1 Answer

Broken motor mounts?

I already know that my motor mounts are broken i just wanted to know how much do they cost to buy them and have some one fix them? I am going to buy them myself soon cause im shire its cheaper that way then paying some one to go and buy it for me or to have them special order it. I just need a rough price on how much there gonna run me money wise and how much it will cost me to pay some one for the labor?

Posted by on

Ad

1 Answer

Would you not ask that question at an auto parts store
or go to an inline parts site?

Why not also install yourself?

I don't think a repair shop will appreciate you
walikg in with new parts as they loose the 20% or
more your trying to save.

On a Taurus you replace the motor & transaxle mounts

All of them,I think that is 3 in total.

Posted on Jan 21, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 290 Answers

SOURCE: Cost to replace wheel bearings on 1997 ford aspire

advance auto parts total price for all bearing, front and rear and seals come to $70.00. labor should be about that much(plus cost of grease) good luck

Posted on Sep 04, 2009

c1apton15
  • 3400 Answers

SOURCE: I took my 02 spt

Timing chains stretch with age and when they do they start "slapping" timing case. If your extended warranty people were intelligent they would cover the replacement instead of waiting till it explodes and destroys a ton of other parts.

Posted on Mar 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor mount


Replace the motor mount,assuming the broken
stud is part of it.

Jul 03, 2013 | 2000 Oldsmobile Alero

1 Answer

Hard shift from first to second 2005 ford tauras


put a jack under tha trans. and jack it up (JUST COUPLE INCHES ) see if the Transmission mount behind drivers tire is broken, if so it will raise up and come apart , NEXT ! Raise the hood "hold the brake and watch the motor through the windshield or stand up with one foot on the ground "Watch the motor see if it looks as if it motor is raising up and down if so you have a broken mount somewhere ! But if not you will need to change the shift solenoid thats inside the trans pan thats located behind drivers side front wheel order one from E-BAY for low cost, buy all three and change them while you have it apart ! Danny Coleman

Apr 02, 2013 | 2005 Ford Taurus

1 Answer

I got a ford 2006 and I'm almost poserive the


If you have broken motor mounts the easiest way possible to fix it is to replace the motor mounts.

May 15, 2012 | 2006 Ford Fusion

1 Answer

My 2000 chrsler cirrus had broken the front and rear motor mount now you have to slam it in park for the indicator to grab and if you smoothly put it in park the indicator says reverse and has alot of free...


You need to fix the motor mounts before anymore damage accrues to the vehicle.IF you continue to slam the car into park, you are taking a big chance of ruining your transmission then you are talking very costly repairs. Replacing the motor mounts is an easier job and the price is not nearly as expensive as replacing transmission and other parts that could get broken during this.

Jun 17, 2011 | 2000 Chrysler Cirrus

2 Answers

BROKEN MOTOR MOUNT


how much?? come on its not a difficult job just get the front up on stands and then use the jack with a block of wood under the sump to take the weight of the engine and remove them ,then go to auto factors for new ones ,refit them and still have time to go to the bar to watch england play and win the footy ,

Jun 26, 2010 | 2001 Dodge Stratus

2 Answers

What is 5 motor mounts that are bad. Can I drive


You can drive the car up to a certain point. If the motor mounts are just worn and not broken you can drive it, but It would be best if they were fixed. If they come loose you have the potential to wreck a lot of stuff, if they are broken, which is usually how you tell if they're bad or not, then I would definitely fix them before driving it.

Nov 16, 2009 | 2003 Nissan Altima

2 Answers

I have 2002 pt cruiser Put new upper and lower


IT SOUNDS LIKE THE MAIN MOUNT IN FRAME ON PASS SIDE IS BROKEN..I HAVE NEVER SEEN ONE BROKEN BEFORE OR REPLACED ONE,BUT IT WOULD A FAIR JOB TO REPLACE..ALSO THE BOLT THAT GOES THRU FROM FENDERWELL MAY BE BROKEN..CAUSING YOUR PROBLEM..THERE IS A SMALL PLASTIC PLUG IN FENDER WELL..ABOUT AN INCH OR SO IN DIAMETER..THERE IS A TORX BOLT(T55)IN BEHIND PLUG..CHECK AND SEE IF IT'S NOT BROKEN..TRY TIGHTENING OR LOOSENING IT..IT MAY BE BROKEN OFF IN PLATE THAT IS BOLTED TO ENGINE..LET ME KNOW WHAT YOU FIND

Sep 08, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Broken Motor Mount or Motor Mount Bolt


to check for a bad motor mount u need 2 people for this. Have the car running put it into gear with your foot pressed firmly on the brake u don't want to run your buddy over. Give it some gas in the motor is jumping around alot like 6 inches in any direction you have a broken motor mount. Which way the engine jumps will let u know which one is bad. Try this test in reverse gear to.

Aug 26, 2009 | 2003 Chrysler PT Cruiser

5 Answers

Noise and Vibration


I replaced the lower passenger side engine mount and the vibration is still there but a bit less vibration. The lower passenger mount was worn out. I was told by the Dodge service dept that it takes 5 hours to change the main hidden engine mount which is mid way up the passenger side of the engine. That main hidden mount cost 75.00

To get to it you would have to remove the wheel, inner fender plastic work, windshield washer fluid tank, and etc.

Aug 28, 2008 | 2003 Dodge Neon

Not finding what you are looking for?
1991 Ford Taurus Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...