Question about 2004 Cadillac SRX

Open Question

Cadillac srx cooling fan switch

How to replace cooling switch

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX

http://wiki.answers.com/Q/How_to_change_the_Cadillac_SRX_Front_Tun_Signal_Bulb

Posted on Nov 22, 2008

Ad
  • 3 Answers

SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX

wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.

Posted on Jan 25, 2009

techbuster
  • 5081 Answers

SOURCE: rear liscese plate bulbs on 05 cadillac srx

First you have to take out the one and only screw in the rear hatch door - it's where the hand pull down is you use to close the hatch.
Then you have to pop all the plastic clips all the way around the plastic door panel, trying not to pull them out from the frame . If you do pull out the white plastic plugs from the frame you better make certain you take them off the plastic housing and insert them back into their frame holes - or you will never get the housing back on.

Once you have the housing loose disconnect the inside tail gate light wire to remove the whole thing. Then you have to remove 7 to 8 nuts from the back of entire License plate, back up bulb housing using a deep socket to get in there. Work it loose from the rear of the car and it will come out just enough to work on the lights.
This is tricky since the screw mounts don't give you much room to work with.

Once you have the license plate and back up bulb frame loose you will see the two housings for the license plate bulbs on top.

Slide out the license plate bulb lens and twist the bulb connection to remove the bulbs.
Replace both of them - you don't want to do this again in a month when the other one blows.

OPTIONAL:
Once you take out the bulbs you might see that the housing is melted where the bulb wanted to burn through. Drill two small holes one is each end of the housing before I put everything back together to release some of the heat.


Reverse the whole process to put everything back together. It's not easy.
Make sure you insert the cables through the opening for the hatch handle or it will kink and not work properly.

The bulbs come in a two pack of cost $4.95 .

Posted on Nov 24, 2009

  • 2 Answers

SOURCE: My 2004 Cadillac SRX with a 3.6 V^ will not turn

its your ground off thr starter geting to hot

Posted on Nov 30, 2009

  • 396 Answers

SOURCE: Wiring diagram for 2009 Cadillac SRX

Try your dealer parts counter.

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 cadillac srx fixing or replacing light bulbs rear license plate


You might be able to access it if you stick your hand up inside the rear of the bumper.

Nov 26, 2015 | 2008 Cadillac Srx

1 Answer

Trans hot engine idle"this indcator show in my cadillac srx 2004 4.6 awd"what deos it means??


You need to take it to a transmission shop for diagnostics and possible repair.

Nov 05, 2014 | Cars & Trucks

1 Answer

How do I lower the backseats in my 2005 Cadillac SRX so they lay flat


Could be a switch under or around the trimming of the seat. if you cant figure it out take it to the dealer they will be happy to help you.

Sep 21, 2014 | 2005 Cadillac SRX

1 Answer

SRX Engine Cooling Fan


Remove the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement .
Important:
The fan nut has left hand (REVERSE) threads.
Do not completely remove the fan from the crank adapter shaft.
Loosen the fan nut from the crank adapter shaft using J 41240-5A .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the engine wiring harness from the engine frame and reposition aside.
Continue to loosen the fan nut and disconnect the fan from the crank adapter shaft.
Remove fan from vehicle.

Oct 27, 2017 | 2004 Cadillac SRX

1 Answer

How do I replace the battery in my 2005 Cadillac srx?


how to replace the battery in my 2004 cadillac srx

Oct 24, 2010 | 2005 Cadillac SRX

1 Answer

My 2004 Cadillac SRX with a 3.6 V^ will not turn


its your ground off thr starter geting to hot

Nov 30, 2009 | 2004 Cadillac SRX

Not finding what you are looking for?
2004 Cadillac SRX Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...