Question about 2008 Chevrolet HHR 2.2
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
usually a pan under the trans. anywhere from 10 to 22 bolts. filter inside. some vehicles have an oil style filter on the externally, but i don't think that this is one.
Posted on Sep 24, 2008
SOURCE: air filter on chevy hhr
The air filter is in the large plastic cover that covers the engine.
1. Remove MAP sensor connector ( slightly hidden under the front center edge of the housing. Wiggle slightly and pull straight out).
2, Loosen (but don't remove) the large hose clamps on the passenger side and center of the housing, It's a tight fit for the hands on the passenger side and the head of the clamp is facing away from you. The front center hose is stiff, but pliable, so take your time.
3. The air filter housing was designed as a snap in with rubber grommets. A firm steady pull with the front passenger side will show you how much effort it will take to pull it free. Do each of the remaining two separately. The housing will be free to remove from the vehicle.
4. On a clear area, turn the housing over and loosen the seven torx type screws (they will not come completely off, so as not to lose them). Pull the cover off. Remove the old filter and replace with your new one. Align the cover and snug the screws back in.
5. Reassembly requires lining up those rubber grommets to the mounting studs.... take your time.... all that is needed is a firm downward push to seat them.
6. Reattach the large hose clamps and remember to plug in the MAP sensor (you'll get an "check engine" light if you forget.
Hope this helps.
Posted on Nov 22, 2008
the power steering fluid resevoir is located on the passenger side of the engine compartment near the fire wall. mostimes in order to fill it you have to remove the altenator to remove the fill cap to add the fluid.
Posted on Apr 17, 2009
Tips for a great answer:
Feb 13, 2015 | 2006 Chevrolet HHR
Dec 03, 2012 | 2006 Chevrolet HHR
Jan 10, 2012 | 2007 Chevrolet HHR Panel LT New Cars
Aug 30, 2010 | 2006 Chevrolet HHR
Apr 05, 2010 | 2006 Chevrolet HHR
Oct 02, 2009 | 2006 Chevrolet HHR
448 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: