Question about Toyota Cars & Trucks

Open Question

How do I Replace gas filler door hinge 2003 camry

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Replacement of gas door

A friend who is a mechanic fixed it for me. Thank you.

Posted on Aug 26, 2008

Ad
  • 1861 Answers

SOURCE: Broken spring on the gas fuel tank door on Toyota ''Camry'' 1998

Go to your nearest Toyota dealer. Purchase this part number: 77360-22020; approx 4 dollars.

Open the fuel door. Being careful, remove the leftover plastic that is hooked by the door hinge. Insert the new spring assembly under the slot, and press it in until it clicks into place. Very easy to do.
Hope this helps, and thanks for choosing FixYa.

Posted on Nov 21, 2008

  • 2 Answers

SOURCE: 2003 KIA Sarento - trying to pure gas in filler tubr to gas tank

your gas tank has one part the releeses fumes @kia 2004 is reecal

Posted on Oct 08, 2009

  • 71 Answers

SOURCE: I can't get the gas door to stay closed.

If the gas door is not latching then the retainer spring may be weak even if it isn't broken. You will need to replace this.

Posted on Jul 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not put gas nossle into the filler , metal shield is not releasing ?


you keep posting this,
anon too.
you meant the gas cap , door, right>
the door with hinge and latch
and can not find the lever for said latch?
if the lever fails that means the cable is bad.
replace cable.

Mar 09, 2015 | 2013 Jeep Grand Cherokee

1 Answer

To manuelly open 2003 Maxima gas filler door


I'm having this problem with my 2003 nissan maxima. I keep the driver side door open and keep my hand at the edge where the fuel door hinge is, and reache the button with a screwdriver or pen, and as it press the button, I push on the fuel door panel and it comes out. I'm going to replace the fuel door sooner or later. It all looks kinda dumb at the gas station.

Jan 23, 2012 | 2001 Nissan Altima

1 Answer

I can't get the gas door to stay closed on my 2003 camry. the spring is not broke.


If the gas door is not latching then the retainer spring may be weak even if it isn't broken. You will need to replace this.

Jul 10, 2010 | 2003 Toyota Camry

1 Answer

Where is the differential filler located in the 2003 toyota camry?


The transmission incorporates the differential so the trans filler tube will be the fill area you will use with trans fluid

Apr 15, 2010 | 2003 Toyota Camry

2 Answers

Fuel leaks from filler pipe to gas tank


You don't need to replace the gas tank, the filler pipe is connected to a rubber hose which connects to the tank with clamps at each end.

Mar 08, 2010 | 1995 Toyota Camry

1 Answer

Window on driver side of 2003 Camry stuck. Had


You can adjust the door latch by aligning the male and female portion of each. This can be adjusted by loosening the screw and aligning it. And finally when aligned, tighten the screw. Unless otherwise if the door hinges are loose, such that the doors are misaligned, then, you have to replace the door hinges. Or put a bushing at the door hinges to keep it
aligned. This will correct the defect.

Nov 15, 2009 | 1992 Toyota Camry V6

1 Answer

Fuel filler lid wont open on button push- Toyota Avensis 03


no moter on that if you are going in trunk an reaching in to pull cable and it opens.try bending the latch an gas door lock. pin is going in to far

Jun 04, 2009 | 2003 Toyota Camry

1 Answer

Location of cabin air filter 2003 toyota camery


Go inside the car, on the drivers side, from the floorboard look at the top of the gas pedal from the door. From the door, look just past the top of the gas pedal you will see the spot to pull the filter out. There are 2 parts to the filter in this car so replace both. One - Filter, 2 charcoal filter.

Dec 06, 2008 | 2003 Toyota Camry

2 Answers

Broken spring on the gas fuel tank door on Toyota ''Camry'' 1998


Go to your nearest Toyota dealer. Purchase this part number: 77360-22020; approx 4 dollars.

Open the fuel door. Being careful, remove the leftover plastic that is hooked by the door hinge. Insert the new spring assembly under the slot, and press it in until it clicks into place. Very easy to do.
Hope this helps, and thanks for choosing FixYa.

Nov 21, 2008 | 1998 Toyota Avalon

1 Answer

Fuel tank door hinge


Found on-line at other sites.


[Removing/Repairing Gas Filler Door Hinge: Tip from Bill Peyton]   The gas door hinge will break if pushed forward.  This is usually done by moving around the car with the door open, or by curious children.  The repair job can be done completely from the exterior. 
 
The black plastic hinge is held in place by four plastic rods.  When pushed through the body of the car, they expand four rubber sleeves located on the interior, thereby holding the whole thing in place. 
Remove as follows: 
Open the door, and using a small punch, push the four plastic rods through to the interior of the car.  The door will now come out.  Note the position of the spring and the hinge.  Remove the spring from the old hinge, and either cut or pry our the old hinge.  This is a black plastic piece. 
The ends of the new hinge are tapered to make it easier to insert into the gas door.  Clip the spring back into place. 
Now for the hard part.  You will see on the new hinge four plastic rods.  These are held onto the hinge by four small connections, all molded into a single piece.  On the other side of the hinge are four plastic “flowers” split into four pieces.  You will need to push the plastic rods through the “flowers”, once the “flowers” are pushed through to the interior of the car.   Since the rods are not free floating, they tend to break off and fly away unless you hit them squarely.  If this happens, put a little taper in the ends, place them back in the hold, and push them through.  A punch and a hammer will be essential.  Alternatively, you can break the rods off while the piece is off the car, insert them manually, and drive them in again with the punch.
 

Jul 07, 2008 | 2003 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...