Question about 1997 Chrysler Concorde
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: torque specs needed
do you have a Haynes reapir manual or Chiltons? if not you can get one from autozone or some other parts places, or you might find one in your local library, inside that book are all the torque specs you can stand.
Posted on Mar 23, 2009
dont know the specs but you should be ok if you tighten the bolts snuggly and then 1/2 turn this will usually suffice just be careful not to over tighten
Posted on Nov 01, 2009
Tighten the cylinder head bolts 1 - 8 in the sequence shown in Cylinder Head Bolts Location and Tightening Sequence Using the 4 step torque turn method, tighten according to the following values:
Step 1: Bolts 1 - 8 to 61 N·m (45 ft. lbs.)
Step 2: Bolts 1 - 8 to 88 N·m (65 ft. lbs.)
Step 3: Bolts 1 - 8 (again) to 88 N·m (65 ft. lbs.)
Step 4: Bolts 1 - 8 turn an additional 1/4 Turn. (Do not use a torque wrench for this step.)
NOTE: Bolt torque after 1/4 turn should be over 122 N·m (90 ft. lbs.) If not, replace the bolt.
Tighten head bolt number 9 Cylinder Head Bolts Location and Tightening Sequence to 33 N·m (25 ft. lbs.) after head bolts 1 - 8 have been tighten to specifications.
Posted on Jan 29, 2010
Tips for a great answer:
Apr 11, 2016 | 2001 Chrysler Town & Country
Mar 28, 2013 | 2004 Chrysler Pacifica
Dec 31, 2012 | 1997 Chrysler Town & Country
Aug 28, 2012 | Suzuki Aerio SX Cars & Trucks
Nov 01, 2009 | 1999 Chrysler Cirrus
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: