Question about Lexus LS 400

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement?

Posted by on

  • 1 more comment 
  • visionaire Mar 16, 2009

    How do you replace the bulb?

  • James Batton
    James Batton Apr 11, 2009

    I have the same problem--passenger low beam out. Do you just replace the bulb and how do you get it out. (1997 Lexus LS400)



    Thanks,



    Jim Batton

  • yadayada
    yadayada May 11, 2010

    1st there is no fuse for the headlight, have u replaced the bulb?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Bulb but check all the fuses under the hood

Posted on Jan 26, 2009

2 Suggested Answers

  • 10865 Answers

SOURCE: Low beam, driver's side headlight

The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

Posted on May 06, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

The driver side headlight works on high beam but not low beam, can i replace a bulb or do I have to replace the entire headlight assembly?


You replace the bulb

You do however have to remove to entire
light housing assy

Should be 2 screws on top and one not so
fun to reach down in the back

Feb 11, 2011 | 2000 Lincoln LS

1 Answer

The drivers side low beam was out so I replaced


there is a fuse for each side of the headlights check for a blown fuse.

Jan 29, 2010 | 2001 Lexus RX 300

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

I need to replace the driver side low beam headlamp bulb, but the bulb itself can't be removed. I have removed the battery for easier access. HELP !


The low beam bulb, drivers side, can be replaced by removing the entire headlight assembly, unplugging the electrical connection to the bulb, "pinch" the retaining clip on the bulb and the bulb comes right out. The only problem is the cost of the bulb---about $ 140. The replacement took about 45-50 minutes to complete.


Jun 13, 2009 | 2003 Nissan Maxima

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement? I have the same problem, low beam, driver's side headlight is out but I can't figure out how to get the bulb out to...


The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

May 06, 2009 | 2004 Lexus ES 330

1 Answer

Driver side low beam not working


You will need to change the bulb.

Dec 21, 2008 | 1998 Honda Prelude

1 Answer

Burned out headlight/bulb bmw 1991 325i 2dr


It's a bulb replacement. If it's anything similar to my Audi, there is a cover on the back of the headlight housing that you pop off. Then you can reach in, pull the wire connector off the bulb, and unclip a metal retainer over the bulb, and pull the bulb out. Installation of the new one is the reverse. Just be SURE not to touch the glass part of the bulb. Skin oils can cause a halogen bulb to burn very hot and burn out very quickly. If you do touch the glass, wipe it gently but thoroughly on a cotton cloth to clean it off before you install it.

Oct 31, 2008 | 1991 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

555 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...