Question about 2003 Chevrolet Venture Passanger

Open Question

How to disconnect chevy venture air leveling pump

Pump not working have py passed with manual system

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: location of a secondary air

The A.I.R pump is located on the driver's side of the vehicle, just in front of the front tire. If you remove the tire & look at the inner fender well, you'll see that it's designed with a "trap door". Remove the screws that hold the door closed, then fold the door back to reveal the pump. What usually happens is the pump sucks in the sponge filter on the intake side & it lodges in the impeller blade...this causes the fuse to blow & eventually a code will set & the Service Engine Light will come on. The fuse is located under the hood in the black fuse box on the passenger side...the box should be clearly visible & easily accessable. Look for a 30A fuse, probably in location # 39.

Posted on Jan 13, 2009

Ad
  • 840 Answers

SOURCE: need wiring dig. for 2005 chevy venture window switch

call any gm parts dept they can print one up for you just give them your vin Please rate my response thank you very much

Posted on Feb 02, 2009

emissionwiz
  • 76691 Answers

SOURCE: 2000 Chevy Venture Fuel Pressure Regulator

use the pressure test port on the top of the engine, it is on the fuel rail that supplies fuel to the injectors, looks like a tire valve, will have a plastic cap on it.

Posted on Mar 22, 2009

landsend
  • 1066 Answers

SOURCE: i replaced the fuel pump and fuel level gauge on

sounds like the fuel sending unit has an short in it.  Is there a gasket that you aren't installing or that is defective?

Posted on Mar 23, 2009

  • 314 Answers

SOURCE: 1998 chevy venture stumbles when you accelerate

check the throttle position sensor and also check for air intake leaks at the throttle body

Posted on Jun 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low oil pressure light comes on in 2003 chevy venture?


Oil level? Last time serviced? Oil filter changed? Number of miles? Regular service as required by Owner's manual? Otherwise if none of these are a problem, you may have a failed or failing oil pump. Worst case is bearing problem.

Feb 13, 2015 | 2003 Chevrolet Venture Passanger

1 Answer

Location of orifice tube in 2000 chevy venture


best advice is the method i would use to located the orifice tube in the 2000 chevy venture. check the automotive repair book section in your local library. Most libraries have repair manuals on their automotive shelf section. find the a/c manual for your year and model car. make a copy of the page that has the information you need. you will need to make a copy because the library will not let those manuals be checked out. you might want to google for the location of the orifice tube location. I hope this helps.

Jun 18, 2014 | 2000 Chevrolet Venture

1 Answer

The chevy venture i replaced the pass key in has the PK3 key and i cant get it to start


The module may have failed.
The module reads the chip in the key thru the sensor in the lock cylinder.

Sep 24, 2012 | 1999 Chevrolet Venture

1 Answer

Change theromstat 2003 chevy venture


Thermostat Removal & Installation To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Partially drain the coolant, (until the level is below the thermostat).
  3. Remove or disconnect the following:
    • The air cleaner and duct assembly
    • The crossover exhaust pipe
    • The radiator hose from the thermostat housing
    • The thermostat housing bolts
    • Any remaining sealer from the bolt threads gm_mv_ven_tstat.gif

    • The thermostat housing
    • The gasket
    • The thermostat
To Install:
  1. Install or connect the following:
    • The thermostat
    • The thermostat housing
    • The gasket NOTE: Apply RTV sealer, GM P/N 1052366 or the equivalent, to the thermostat housing bolt threads.
    • The thermostat housing bolts
      1. Torque to: 18 ft. lbs. (25 Nm)
    • The radiator hose to the thermostat housing
    • The crossover exhaust pipe
    • The air cleaner and duct assembly
    • The coolant
  2. Thoroughly inspect the cooling system for leaks.
prev.gif next.gif

Nov 05, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

2001 Chevy Venture Question


It is the automatic level control system.

Sep 07, 2009 | 2004 Chevrolet Venture Passanger

1 Answer

No power to fuel pump on 99 chevy venture


If you do not have power on the GRAY wire at the fuel pump.........
switch the fuel relay with a same type good relay in the relay box and check for power again.
REMEMBER ...YOU WILL ONLY HAVE POWER 2 OR 3 SECONDS AT PUMP AFTER KEY IS TURNED TO RUN POSITION......after key has been off for 10 seconds.(or when there is oil pressure)
If no power in the gray wire at this point and you have checked ALL fuses in engine compartment and on right (pass ) side of dash panel facing pass door.......add your own jumper to supply power to system at fuel pump fuse and test again.........if power at pump now....install a permanent jumper (SWITCHED POWER....OFF WITH KEY) at fuse box......if still no power check all connections between fuse box and pump.....or run new power feed wire to pump gray wire and disconnect old.

Aug 19, 2009 | 1999 Ford Windstar

1 Answer

1998 chevy venture stumbles when you accelerate


check the throttle position sensor and also check for air intake leaks at the throttle body

Jun 15, 2009 | 1998 Chevrolet Venture Cargo

2 Answers

ABS TCS lights on Chevy Venture 1999


try bleeding thr brakes. might have a bit of air by a sensor in the abs system. check your fluid level.

Jun 08, 2009 | 1999 Chevrolet Venture

2 Answers

How to replace water pump on 2003 chevy venture van 6 cyl


get a maual at the part store very cheap 15 dollars ,, will help u a lot in bleeding the system

Jul 22, 2008 | 1997 Chevrolet Venture

1 Answer

Air Pump


you can remove the pump and buy the oem pump and replace the whole thing or you can buy an aftermarket one and run higher pressure and save money at the same time look at princess auto they sell a few cheap quality pumps for a good price good luck with this project

Jun 28, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...