Question about Chrysler 300M

1 Answer

I need help fixing the bulb on my headlight on my 1999 300m

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

With that model car the headlight assembly has to be removed from vehicle. but its not that hard. there are either 7 mm bolts or 10 mm bolts and or both. then take out the headlight and replace bulb.

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight bulb in 2003 Acura 3.2 CL


Nick, To see how headlight bulb is changed, check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Replacement How to replace install fix change hid head light ballast...
Headlight Change 1999 2003 Acura TL 1999 Acura TL 3 2L V6
Acura TL Headlight Replacement WITHOUT removing the bumper

Aug 06, 2016 | 2003 Acura 3.2CL

2 Answers

Honda accord keep burning low beam headlights


Sounds to me like you need to reset the headlight housings... maybe they are vibrating very badly. ... OR, easy fix, get NEW headlight housings on EBay and install.

Nov 28, 2011 | 2004 Honda Accord

1 Answer

I need instructions on how to change the headlamp bulbs on a 2005 grand marquis. Please help.


To remove first you want to remove the headlight door mounting screws and remove the headlight door. Then you want to remove the 4 retainer ring screws and remove the retainer ring from the headlight. Then you want to pull the headlight bulb forward and detach the wiring connector.

To install you first want to a
ttach the wiring connector to the headlight bulb and place the bulb in position, locating the bulb glass tabs in the positioning slots. Then you will attach the bulb retainer ring to the assembly with the retainer ring screws. Then you will install the headlight door and secure with the screws. Then you will check the headlight bulb aim and adjust as necessary

Let me know if this helps you.

Mar 07, 2011 | 2005 Mercury Grand Marquis

1 Answer

How do you replace the headlight on a 2002 Daewoo Lanos


Hi there, together with providing you the solution to the problem, I also took the liberty of going one step further in giving you steps on how to remove the headlight bulb.

  • Find the hood release handle and activate it, the hood should pop open.
  • Once the hood is popped open locate the hood secondary or safety latch and release it. Then finish opening the hood.
  • Locate and remove mounting clips for any plastic shields that cover the headlight lens mounting screws or clips.
  • Some headlight bulbs can be replaced by simply grasping the bulb socket behind the headlight lens and turn it counter clockwise to remove it. This will expose the headlight bulb.
  • If the headlight bulb socket is not accessible the headlight lens may need to be remove or obstructions behind the bulb removed to gain access to the headlight bulb socket.
  • To remove the headlight lens remove all mounting screws and clips that hold the headlight lens in place.
  • After the headlight housing has been removed from it's mounts, release the headlight bulb from the headlight lens housing (turn counter clockwise) the bulb will then come out of the headlight assembly. Once removed, visually verify that the replacement bulb is exactly the same as the failed bulb before to ensure a proper repair.
  • Clean the headlight lens free from all debris to help maintain the seal from the bulb to the lens. This will keep moisture out of the lens.
  • Install the new headlight bulb by turning the retainer ring or bulb clockwise.
  • Re-install the headlight lens housing and reinstall electrical connector.
  • Re-install plastic covers.
After the job is complete turn the ignition key to the "on" position and activate the headlight switch. Observe the newly replaced headlight bulb to ensure proper operation.

Glad to be of help!!!

Jan 21, 2011 | 2002 Daewoo Lanos

1 Answer

Once I remove the nuts and bolts, I can't get the headlight to move


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative (-) battery terminal.
  3. Loosen the mounting bolts and nut of headlight assembly (A).
    22140_sant_g0056.gif

    Loosen the mounting bolts and nut of headlight assembly (A)-Santa Fe
    Click to Enlarge 22140_sant_g0057.gif

    Loosen the mounting bolts and nut of headlight assembly-Veracruz
    Click to Enlarge

  4. Take care that retaining clip (A) is not to be damaged-Santa Fe.
    22140_sant_g0058.gif

    Take care that retaining clip (A) is not to be damaged-Santa Fe

  5. Disconnect the headlight electrical connectors.
  6. Remove the headlight assembly.
  7. Remove the headlight bulb:
    • Remove the headlight bulb(s) with a counterclockwise turn-Santa Fe.
    • Remove the headlight bulb after removing the bulb caps (A)-Veracruz.
      22140_sant_g0060.gif

      Remove the head lamp bulb(s) with a counterclockwise turn-Santa Fe
      22140_sant_g0059.gif

      Remove the headlight bulb after removing the bulb caps (A)-Veracruz

To install:

  1. Install the headlight bulbs.
  2. Install the headlight bulb caps-Veracruz.
  3. Connect the headlight electrical connector.
  4. Install the headlight assembly.
  5. Connect the negative (-) battery terminashinehutt_36.gif

once bolts out lift up on the headlight unit hope this helps plz vote comment reply if you need more help

Jan 17, 2011 | 2007 Hyundai Santa Fe Limited

1 Answer

Replacing headlight bulb on 2006 maxima


Hello,

Replacing Your headlight bulb seem to be easy when You look at it, but quite technical. But If You get the proper guide, I think fixing this will not be difficult for You. You will be needing these instruments to fix this(Flathead screwdriver, Phillips head screwdriver, 3/8 inch drive ratchet, 3/8 inch drive 10 mm socket, Replacement bulb(s), Shop rags or towel), then You carefully follow the steps below to fix this:
  1. Turn the steering wheel all the way in toward the engine on the side you are changing the light bulb in. For the driver's side bulb replacement, turn the steering wheel all the way to the right. For the passenger side bulb replacement, turn the steering wheel all the way to the left.
  2. Turn the ignition switch to the off position and remove the keys. Make sure the light switch is in the off position.
  3. Remove the retaining clips and screws from the front of the wheel well area, including the bottom splash shield valance underneath the front of the Maxima. The valance is attached to the wheel well and can be left intact. Use the Phillips head screwdriver for the screws and the flathead screwdriver to pop up the center post of the clips and then pry the clips out. Remove enough of the clips to gain access into the front fender cavity.
  4. Locate and turn the outer low-beam headlight cover counterclockwise to remove it. This will reveal the bulb and socket.
  5. Turn the bulb counterclockwise to remove it from the headlight assembly.
  6. Release the retaining pin (if applicable for theft deterrent package).
  7. Remove the wire harness plug from the bulb socket and then remove the bulb.
  8. Insert the new bulb into the socket without touching the glass of the bulb. Reverse the procedure to reinstall.
But if it is the high beams bulb You want to replace, then please follow the steps below, It is the same instruments as before You will be needing to do this job.
  1. Release the hood latch if you're replacing the high beam bulb only. Then lift the hood. Locate the two 10 millimeter bolts at the top of the headlight assembly and remove them with the ratchet and the socket.
  2. Locate the four fascia retaining pins and remove them using the flathead screwdriver. This will allow flexible movement of the fascia to remove the headlight assembly.
  3. Place a shop rag or towel between the tight gap of the fascia and the bottom of the headlight assembly to prevent scratching the fascia.
  4. Maneuver the headlight assembly forward away from the front of the Maxima. There is a guide pin still retaining the assembly in place so apply equal parts of determination and gentleness to remove the assembly without scratching the lens or the fascia.
  5. Remove the headlight assembly far enough to get your hand behind it and remove the seal from the back of the high-beam headlight. Turn the seal counterclockwise to remove.
  6. Turn the bulb counterclockwise to remove from the assembly.
  7. Release the retaining pin (if applicable).
  8. Unplug the wire harness from the light bulb and remove the light bulb.
  9. Plug the new replacement bulb into the wire harness without touching the glass of the bulb.
  10. Reinstall by reversing the procedure.
Hope this information helped. Thank You for using FixYa!!!

Jan 15, 2011 | 2006 Nissan Maxima

1 Answer

Need to replace headlight bulb 2007 hhr


H13 HALOGEN HEADLIGHT BULB, SOLD INDIVIDUALLY -- Low 55/high 65-watt halogen bulb; 12.8 volts; P26.4t base; A high quality, direct fit OE replacement headlight bulb

3c8c3dc.jpg


How to Replace a Headlight Bulb
(DIY Complexity: Easy / Time: 0.9 hour)

Parts:
1. Headlight Bulb

Tools:
1. Screwdriver
2. 1/4 in. Drive Ratchet
3. Socket Set

Steps:
Step 1 Open the hood and locate the headlight assembly.
o Tip: Most headlight assemblies have a place in the rear to gain access to the headlight bulb.
o Tip: It is recommended that headlight bulbs are replaced in pairs.
o Tip: Always make sure the struts on the hood can fully support the weight of the hood so that it does not close on you while working. The use of a hood prop can securely hold it in place.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Gain access to headlight bulb.
o Tip: It is a good idea to check the high beam and low beam headlight bulbs at this time.

Step 3 Disconnect the wiring harness and replace the old headlight bulb with a new one.

Step 4 Turn on the headlights and check high and low beams to verify repairs.

Hope this help (remember rated this help). Good luck.

Mar 30, 2010 | 2008 Chevrolet Hhr

2 Answers

One of my Headlight not working during low beam


Your low beam bulb filament is out -- replace the bulb.

May 29, 2009 | 2006 Dodge Caravan

1 Answer

Change Headlight on a 2005 Subaru Impreza


IF the bulb is the only part you need to replace, Where the wires for the bulb are there is a large plastic ring that just 1/4 turns to release the bulb. Do not touch the bulb with your fingers. Just unplug the bulb and replace with new one then reinstall and 1/4 turn to seat it again. There are no screws to remove for the bulb replacement. Sometimes the local auto stores will do it for you. Advance Auto here will put them in for you. Good luck and have a great day.

Mar 28, 2009 | 2005 Subaru Impreza

1 Answer

HEADLIGHTS


Hi,

A couple of suggestions:
1. Check/replace the bulbs;
2. Check/clean the connectors;
3. Check/clean/replace the fuse;
4. Check/clean headlight relays.

Often the problem that exhibits dim headlight is loose grounding. The three wires that leads to each headlight bulb would be for low, high and ground.m You need to trace the ground wire and determine if the other end is grounded properly. A quick fix is to add a grounding strap/wire to the appropriate wire/connector of each headlight bulb with the other end to the chassis/body of the vehicle.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 18, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...