Question about 1991 Ford Mustang

1 Answer

Engine Removal for 1991 Mustang GT

Need details on removing a 5.0 V8 from a 1991 Mustang GT

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

First of all take and un plug all wires to engine then take out radiator then unplug all hoses jack the car up and unbolt the trans and starter make sure all fuel lines or off then unbolt the header pipes now you can take the motor sports lose (note what kind of trans do you have ) if it is a auto you got to take the tork converter lose and once you done all that you can take the hood off then hook chain to engine then start picking up with a hoist but slowly you may need to pull engine from trans as you pull up on the motor watch for any wires or hose that you may didnt see to unhook if you need any more help just let me know good luck and be careful .

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 2007 4.6 mustang engine interchange with a 2001 f150 5.4


What vehicles interchange with F150 4.6? - Ford F150 Forum ...

www.fordf150.net > ... > Modular/Triton V8 Engines: 4.6L, 5.4L (97-10)
Feb 17, 2007 - Well I have a 2000 F150 XLT 4.6 V8 and need a motor, What other vehicles have the same 4.6 V8 that will interchange with this truck? ... possibly an expedition of the same model year, I believe they have a 4.6 or 5.4. ... X - 4.6L EFI-SOHC, eight cylinder (Engine used only for Mustang GT and differs from ... Can i swap my 4.6L for a mustang 5.0 in my 97 f150? - Ford F150 ...
Apr 13, 2011
4.6 to 5.4 engine swap, help!! - Ford F150 Forum - FordF150.net
Jan 18, 2009
Will an intake manifold from a 5.4 fit on a 4.6? - Ford F150 Forum ...
Jan 26, 2004
More results from www.fordf150.net

4.6 to 5.4 Swap Notes - F150online Forums

www.f150online.com/forums/articles.../355403-4-6-5-4-swap-notes.html
Dec 7, 2008 - Application: These notes cover the F-150 from 1997 to 2004 Heritage ...All 97-00 and some 2001 4.6 engines use some sort of intake manifold .... So a 1999+5.4 PCM in a 1997-98 truck will need to have its PATS disabled. 5.0 coyote swap in 97-03 f150?
Nov 12, 2011
4.6L engine swap
Jun 12, 2010
4.2l to larger - motor swap?
May 1, 2009
6.8 V10 Engine Swap
Jan 22, 2003
More results from www.f150online.com

Jan 17, 2016 | Cars & Trucks

2 Answers

I need spark plug wiring diagram for a 1991 302 V8


If you are going to work on this car Purchase the Clymer manual.. or borrow one from the library.. Wiring diagram? there are 8 plug wires (firing order) and a plug for the IGN module. you did not say why you needed a diagram.. What is the car doing ? WRITE A COMMENT AND LET US KNOW WHAT YOU NEED.

Oct 19, 2014 | 1991 Ford Mustang

1 Answer

I need to know where the plug wires go.from spark plug to distibuter cap on a 1986 4.1 coupe deville(cad.)


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: GM (Cadillac) 250 (4.1L) V8 GM (Cadillac) 273 (4.5L) V8 Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: counterclockwise 85872009.gif Fig. 2: GM (Oldsmobile) 307 (5.0L) V8 GM (Oldsmobile) 350 (5.7L) V8 w/EFI Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: counterclockwise 85872009.gif Fig. 3: GM (Buick) 252 (4.1L) V6 Engine firing order: 1-6-5-4-3-2 Distributor rotation: clockwise 85872010.gif Fig. 4: GM (Cadillac) 368, 425, 472, 500 V8 Engine firing order: 1-5-6-3-4-2-7-8 Distributor rotation: clockwise 85872011.gif Fig. 5: GM (Cadillac) 429 V8 Engine firing order: 1-8-7-2-6-5-4-3 Distributor rotation: clockwise 85872012.gif prev.gif next.gif

Feb 08, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

Engine Firing Order


For the 3.6L V6
Firing Order:
1-2-3-4-5-6
Cylinders:
(back of engine)
3---------6
2---------5
1---------4
(front of engine)
Ignition Connections:
.(back)
1...2...3
5...6...4 (double checked-this is correct 5,6,4
..(front)

For the 4.6L V8 Cobra AND GT.
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
(back of engine)
4----------8
3----------7
2----------6
1----------5
(front of engine)

Let me know if this helped...

Mar 15, 2010 | 2000 Ford Mustang

1 Answer

How to take the exhaust manifolds off so i can remove the heads on a 4.6 v8 in a 97 mustang gt


DO YOU HAVE 4.6L SOHC ENGINE.YOU ARE GOING TO HAVE TO TAKE OUT ALOT MORE STUFF.AND YOUR AC SYSTEM HAS TO BE DISCHARGED THE AC COMPRESSOR HAS TO BE REMOVED. NOW IF YOU HAVE 4.6L DOHC YOU DONT HAVE TO REMOVE ALOT OF PARTS TO GET EXHAUST MANIFOLD OFF. WHICH ENGINE DO YOU HAVE.

Sep 21, 2009 | 1997 Ford Mustang Cobra

2 Answers

How do I change a 2005 mustang alternator? NOT gt


2005 Ford Mustang 4.0L SFI SOHC 6cyl
Ford Mustang 1999-2005
Alternator - Removal & Installation

3.8L And 4.0L Engines
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Disconnect the alternator electrical connectors.
  5. Remove the alternator shield (4.0L engine).
  6. Remove the alternator mounting bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 35 ft. lbs. (47 Nm) and the upper bolt to 18 ft. lbs. (25 Nm).
  2. Install the alternator shield (4.0L engine).
  3. Connect the alternator electrical connectors.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.

4.6L Engines (Non-Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the air intake scoop bracket, if equipped.
  4. Remove the accessory drive belt.
  5. Remove the upper alternator bracket.
  6. Disconnect the alternator electrical connectors.
  7. Remove the alternator bolts.
  8. Remove the alternator from the vehicle.
  9. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the mounting bolts to 18 ft. lbs. (25 Nm).
  2. Connect the alternator electrical connectors.
  3. Install the upper alternator bracket. Tighten the bolts to 89 inch lbs. (10 Nm).
  4. Install the accessory drive belt.
  5. Install the air intake scoop bracket, if equipped.
  6. Connect the negative battery cable.
4.6L Engines (Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Raise the vehicle.
  5. Disconnect the alternator electrical connectors.
  6. Remove the alternator bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 18 ft. lbs. (25 Nm) and the upper bolt to 37 ft. lbs. (50 Nm).
  2. Connect the alternator electrical connectors.
  3. Lower the vehicle.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.
  6. Installation is the reverse of the removal procedure.

More details about this model in Autozone.com (free register).

I hope help you with this (remember rated this help). Good luck.

Sep 17, 2009 | 2005 Ford Mustang

4 Answers

83 mustang gt


In a 83 MUSTANG GT the correct answer is BOTH. As a 5.0L and a TURBO CHARGED 4 cyinder were offered.


1983 Mustang GT
  • Engine:
    • 5.0L horsepower increased to 175 HP when 4V carb replaced 2V carb from 1982 (Holley 4180C series).
    • Exhaust system was revised (less restrictive).
    • 4-speed SROD was only transmission available until early December 1982. In December, new 5-speed T5 became standard GT transmission (4-speed remained on option list).
    • Block and crank were revised to accomodate a 1-piece rear main seal in December 1982.
    • The new "Turbo GT" with a turbo charged 4 cylinder engine was available beginning late in the model year - 145 HP and featured the same suspension and other features of the V8 Mustang GT.

Jun 02, 2009 | 1983 Ford Mustang Hatchback

1 Answer

What is fireing order on 95 gt mustang gt/gts caneryyellow auto


5.0
V8 Firing Order: 1 3 7 2 6 5 4 8 Distrib. Rotation Is Counter Clock Wise
3.8
V6 Firing Order: 1 4 2 5 3 6
1 2 3
5 6 4 <<<<< Ignition Coil Pack Plug Wire Order

Feb 09, 2009 | 1995 Ford Mustang

1 Answer

02 mustang gt convertible


4.6 V8. Its on the passenger side, front of the engine. You'll need to remove the AC Compressor to get to it, it's a black sensor, with one bolt holding it in place, with 2 wires comming off of it. Its right behind the AC Compressor

Sep 27, 2008 | 2002 Ford Mustang

Not finding what you are looking for?
1991 Ford Mustang Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...