Question about Jeep Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Dec 15, 2008
SOURCE: valve cover gasket leaking
When you buy the valve cover set, it will include the spark plug well "O" rings. Simply remove the valve cover and on the underside of the valve cover, you'll see the "O" rings that need replaced and you'll see exactly how the valve cover gasket itself fits.
Posted on Feb 12, 2009
SOURCE: replace valve cover gasket
I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.
Posted on May 04, 2009
The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air intake, loose wires etc.) Then you will need to remove your valve covers (using basic tools) and be very careful to not let anything get on your lifters, which your valve covers protect. Once you have the valve covers off compare the new gaskets to make sure they are the right size. Then remove the old gasket and replace with the new one using a high temp gasket sealant (available at any auto parts store) to attach the gasket to the valve covers. Then tighten down snug and check for leaks after replaced.
Posted on May 06, 2009
any vehicle can have any component fail at anytime. The only way to know is to have it inspected for the correct diagnosis if your experiencing problems. If you want a second opinion because you don't trust the first one then your only going to get that at a repair shop.
Posted on Feb 28, 2010
Tips for a great answer:
Feb 13, 2015 | 2002 Jeep Liberty
Jun 28, 2014 | 2004 Jeep Liberty
Sep 14, 2012 | 2004 Chrysler Sebring
Sep 02, 2012 | 2003 Jeep Liberty
Jul 01, 2011 | 2004 Jeep Liberty
Feb 19, 2011 | 2002 Jeep Liberty
Oct 05, 2010 | 2004 Jeep Liberty
May 08, 2010 | 2003 Jeep Liberty
Mar 30, 2010 | 2002 Jeep Liberty
240 people viewed this question
Usually answered in minutes!