Question about 1987 Chevrolet R30

Open Question

Fuel vapor pressure regulator 15598336 GM 1989

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 92 Answers

SOURCE: fuel pressure regulator had no vacuum line connected

another engineers wet dream. think of it this way . what is normally in the intake when the engine is running.. answer vacume, hence the regulator gets its vacume without a hose connected to it as its already in a full time vacume hose required . ps be carefull to seat the regulator and o rings securely into the housing befor you reattach the secureing metal clip.
good luck chris

Posted on Mar 23, 2009


SOURCE: gm no vacuum at fuel pressure regulator

Sounds like you need to take an air hose and blow threw it and then clean your intake manifold with the Seafoam intake it is a foam cleaner it works great i suggest you clean it 2 times 1 to get rid of build up second to clean the surface. We tend to service our engine, oil , Fuel filters but we forget our intake manifold it is vital to engine performance.Remember to rate my solution and leave testimonial this is how i earn my achievements here on FixYa Thanks in advance

Posted on Apr 26, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuel pressure regulator located on a 2002 lincoln navigator? I can't seem to find it

26195813-sqz2ogexbb0ov5gpapqhuz4e-1-0.gif Item Part Number Description 1 9D280 Fuel Injection Supply Manifold 2 9C968 Fuel Pressure Regulator 3 9F593 Fuel Injector 4 9350 Fuel Pump 5 - Vapor Valve 6 9002 Fuel Tank 7 9S278 Rear Fuel Supply Return and Vapor Tube 8 9155 Fuel Filter

May 15, 2016 | Lincoln Cars & Trucks

1 Answer

2000 Chevy 1500 4.8L has 20 lbs fuel pressure. Pump ? Pressure regulator ? Replaced pump GM recommended & still same problem

Fuel Pressure Regulator and Control at ...
AutoZoneShop for Fuel Pressure Regulator and Control products with confidence at Parts are just part of what we do.

Sep 24, 2015 | Cars & Trucks

2 Answers

Have 97 yukon on hot days going uphill then stoping for awhile it wont start but let set for awhile it will start is this vapor lock and what can i do

Most fuel injected vehicles no longer experience vapor lock, since fuel circulates continuously thru the fuel rail and back to the tank. More likely, you have an electrical part which gets hot once you shut the truck off. You need to test for spark to the plugs, and also correct fuel pressure when it fails to start and see which is lacking.

Jun 19, 2015 | 1997 GMC Yukon

1 Answer

1989 ford ranger full size automatic is vapor

Vapor lock is from boiling fuel check fuel line for factory securing clips on frame. check for exhaust leaks added heat is causing your problem. Also test fuel pressure if low this also helps the fuel to expand easier.

Sep 01, 2014 | Cars & Trucks

1 Answer

2005 chevrolet trailblazer troubleshooting

fuel injected car do not get vapor lock,check you fuel pressure,if it is OK (with in spec) pull the vacuum line from fuel pressure regulator if it is wet (gas in it) then you need a regulator as the diaphragm is ruptured ,also bad T.P.S (thrittle position sensor) can cause the same sympton

Aug 15, 2014 | 2005 Chevrolet TrailBlazer

1 Answer

How can i replace the fuel pressure regulator on a 1989 ford taurus?

follow the fuel line before enter the injectors riel and should have a vacuum hose too, is the only part connected to the fuel line anter the fuel filter. thanks

Jul 25, 2012 | 1989 Ford Taurus

1 Answer

Where do I find the fuel pressure regulator and how to change it on a 2001 hyundai xg300

The fuel pressure regulator is built in to the fuel pump

Fuel tank and fuel pump assembly—XG 300

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Fuel supply, return and vapor lines
    • Fuel fill and vent hoses
    • Fuel pump module connector
    • Fuel level sender connector
    • Fuel tank straps
    • Fuel tank
    • Fuel pump module
To install:
  1. Install or connect the following:
    • Fuel pump module and torque the mounting bolts to 12–24 inch lbs. (1–3 Nm)
    • Fuel tank
    • Fuel tank straps
    • Fuel level sender connector
    • Fuel pump module connector
    • Fuel fill and vent hoses
    • Fuel supply, return and vapor lines
    • Negative battery cable
  2. Fill the tank with fuel and check for proper fuel pump operation.

Jan 10, 2010 | 2001 Hyundai XG300

1 Answer


  1. Relieve fuel system pressure.
  2. Disconnect battery ground cable.
  3. Remove fuel filler door.
  4. Remove fuel cap.
  5. Remove fuel tank filler neck housing and disconnect drain hose.
  6. Remove screws attaching fuel meter/fuel pump to tank.
  7. Disconnect fuel lines, fuel vapor line and electrical connector.
  8. Remove fuel meter/fuel pump and gasket.
  9. Replace fuel pump.
  1. Reverse procedure to install.

Jul 27, 2009 | 1989 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides