Question about 2004 Ford F350

2 Answers

My low beam lights come on.

All other lights work but the low beam

Posted by on

  • Ian Jones May 11, 2010

    are the bulbs ok?????? check these first

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

Low beams have a separate fuse for each light in the central junction box, fuse 46 for left head lamp and 47 for right head lamp.
Turn on the headlamps and see if you have power to these fuses and if they are both good. If you do not have power to these fuses with headlamps on (low beam) then muntifunction switch is bad.

Posted on Jan 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Dimmer switch is bad

Posted on Jan 26, 2009

6 Suggested Answers

countrysi248
  • 443 Answers

SOURCE: low beams don't work

there is two things that could be wrong .. check under the hood for your power distribution box .. its black and 3 inches wide and about 8 inches long .. this contains your relays. and some fuses. on the inside of the lid it tells which one is which.. look for low beam relay .. if it is ok check your low beam bulbs and make sure they arent burnt out.. these two things should fix your problem .. or at least one of these should .. holler if you need more. Jerry

Posted on Apr 29, 2009

ftw1952
  • 10319 Answers

SOURCE: No low beam, high beam and parking lights work

Bad headlight switch that needs replacing

Posted on May 23, 2009

  • 58 Answers

SOURCE: My low beam liht (driver side) does not work. High

There is a good chance that the bulb itself is burnt out.Most newer vehicles use fuses for the lights.Check your owners manual for fuse and relay locations.The fuse/relay covers should also be labeled.Your vehicle probably has more than one location for fuse(convenience centers) The locations should be in your owners manual.

Posted on Oct 17, 2009

roniecon
  • 6826 Answers

SOURCE: Low beams shut off and won't come on other lights

Either the low beam head light bulbs have went out,or the dimmer switch has gone out.

Posted on Oct 22, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

Low beam lights not working bulbs


Faulty cable to lights, bulb dying, light knob going out, ect.

Oct 24, 2013 | 1995 Saturn Sl

2 Answers

Low beams dont work on 2000 volvo


It can be faulty low beam lamp or its connection issue for low beam lamps.

There are few solved helps links with proper solution to troubleshoot these issues.I suggest you to refer the links below.Click the link:----
Passenger side low beam out?

http://repairhelpcenter.blogspot.com/2012/01/passenger-side-low-beam-out.html

------------
Low beam HID light goes out? http://schematicsdiagram.blogspot.com/2012/01/low-beam-hid-light-goes-out.html
----------2007 Dodge Caliber: Low Beam Headlight Not working http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html
-------------Chevy Tahoe: Low Beam Lamps are not working? http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html
----------2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working? http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html
--------------2002 Toyota Tacoma: Low Beams not working? http://technoanswers.blogspot.in/2012/04/2002-toyota-tacoma-low-beams-not.html
-----------Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
-----------DRL and Low beams not working? http://schematicsdiagram.blogspot.in/2012/04/drl-and-low-beams-not-working.html
-----------These will help.Thanks.

Nov 25, 2012 | 2003 Volvo S80

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

1 Answer

Low beam not work !!


replace the headlight bulbs. Usually when the bulbs blow out the low beam blows out first, but the high beams still work. If you want and need both low and high beams to work then replace the headlight bulbs with brand new ones and I garauntee that both low and high beams will work

Mar 27, 2009 | 1999 Dodge Caravan

1 Answer

Haed lights


All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams.

Sep 03, 2008 | 1990 Toyota Land Cruiser

Not finding what you are looking for?
2004 Ford F350 Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...